Publikationen 2006

Publikationen 2006

Ade, M., Neudorfer, H., Binder, A.: Modellierung und Simulation des elektrischen Antriebsstrangs für Elektro- und Hybrid-Elektrofahrzeuge, Tagungsband der Konf. „Elektrisch-mechanische Antriebssysteme“, 27.-28.9.2006, Böblingen, VDI-Berichte 1963, VDI-Verlag, p.141-154.
Aoulkadi, M., Binder, A.: Evaluation of Different Measurement Methods to Determine Stray Load Losses in Induction Machines, Proc. of the International Symposium on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, p. 1-13 – S1-18.
Binder, A., Schneider, T.: Leichtere Elektromotoren durch Hochausnutzung von Werkstoffen, thema FORSCHUNG 1/2006, p. 68-72.
Binder, A., Muetze, A.: Calculation of Iinfluence ofIinsulated Bearings and Iinsulated Inner Bearing Seats on Circulating BearingcCurrents in Machines of Inverter-Based Drive Sstems, IEEE Transactions on Industry Applications Vol. 42, July/August 2006, p. 965-972.
Binder, A., Schneider, T., Klohr, M.: Fixation of Buried and Surface Mounted Magnets in High-Speed Permanent-Magnet Synchronous Machines, IEEE Transactions on Industry Applications Vol. 42, No 4, July/August 2006, p. 1031-1037.
Binder, A., Sabirin, C.R., Popa, D.D., Craciunescu, A.: Modeling and Control of an Active Magnetic Bearing System, Proc. of the 10th Int. Conf. on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, p.37-44.
Binder, A., Deak, C., Schneider, T.: Erhöhung der Drehmomentdichte elektrischer Permanentmagnetmotoren durch Einsatz von Zahnspulentechnologie und intensivierter Kühlung, 5. Technischer Tag der VEM-Gruppe, 12.-13.9.2006, Wernigerode, CD-ROM.
Binder, A., Schneider, T., Redemann, Ch.: Lagerlose Motoren – eine Zukunftstechnologie ?, Proc. of the ASB Congress (Antreiben- Steuern -Bewegen), 21.-22.2.2006, Stuttgart, Germany, 12 pages, CD-ROM.
Binder. A., Neudorfer, H., Wicker, N.: Computational Investigation of two Hybrid Vehicle Energy Managements, ATZ 06/ 2006, Vol. 108, p. 22-25.
Binder, A.: Direktantriebe. Fachveranstaltung im Haus der Technik 09.-10.11.2006, Essen, Deutschland.
Binder A., Reichert, K.: Elektrische Maschinen und Antriebe – Auswahl, Auslegung und Dimensionierung. Kurs VDE Lebenslanges Lernern, 22.-24.02.2006 und 22.-24.11.2006, Frankfurt/M., Deutschland.
Cui, X., Funieru, B., Binder, A.: PM Generator No-Load Additional Loss Calculation Using FE Models with an Equivalent Current Layer, Proc. of the 6th Int. Conf. on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, p. 103-104.
Cui , X., Funieru, B., Binder, A.: Calculation of No-Load Additional Losses in the Rotor of StrafloMatrixTM Synchronous Turbine-Generators, Proc. of the Symposium. on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, 6 pages, p. 3-33 – S3-38.
Deak, C., Binder, A.: Highly utilised Permanent Magnet Synchronous Machines with Tooth-wound Coils for Industrial Applications, ELECTROMOTION, Vol. 13 (2006), p.36-41.
Deak, C., Binder, A.: Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings, Proc. of the 10th Int. Conf. on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, p.9-14.
Deak, C., Binder, A., Magyari, K.: Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings, Proc. of the XVII International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM.
De Gersem, H., Mütze, A., Binder, A., Weiland, Th.: Finite Element Simulation of the Common-Mode Flux in Inverted-fed Induction Machines, Proc. of the 6th Int. Conf. on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, p.107-108.
Feng, L., Binder, A., Rentschler, A., Paweletz, A., Guenther, D.: Fault Investigation of X-by-wire Permanent Magnet Synchronous Machine, Proc. of the CES/IEEE-PELS 5th Int. Power Electronics and Motion Control Conf.; 14-16-8.2006, Shanghai, China, Vol. 2, p. 843-847.
Feng, L., Rentschler, A., Binder, A., Paweletz, A.: Fault model of an Inverter-fed PM motor for x-by-wire systems, Proc. of 4th IFAC Symposium on Mechatronic Systems, 12.-14.9.2006, Heidelberg, Germany, p. 205-210.
Gautam, N., Rentschler, A., Schneider, T., Binder, A.: Modeling and analysis of parallel connected permanent magnet synchronous generators in a small hydropower plant, WSEAS Trans. on Power Systems 5, Vol. 1, May 2006, p. 825-830.
Muetze, A., Binder, A.: Don´t Lose Your Bearings – Mitigation techniques for bearing currents in inverter-supplied drive systems, IEEE IAS Magazine, July/August 2006, Vol. 12, No.4, p.22-31.
Muetze, A., Binder, A., Vogel, H., Hering, J.: What can bearings bear? – How much current is too much? IEEE IAS Magazine, Nov./Dec. 2006, Vol. 12, No.6, p. 57-64.
Neudorfer, H., Binder, A., Wicker, N.: Analyse von unterschiedlichen Fahrzyklen für den Einsatz von Elektrofahrzeugen, e&i 123, no.7-8, 2006, p. 352-360.
Neudorfer, H., Wicker, N., Binder, A.: Rechnerische Untersuchung von zwei Energiemanagements für Hybridfahrzeuge, ATZ 06/2006, Vol. 108, p.502-509.
Rastogi, A., Binder, A.: Analytical versus Numerical magnet circuit calculation of PM machines at high load saturation, Proc. of the XVII International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM.
Schneider, T., Binder, A., Chen, L.: Design procedure of bearingless high-speed permanent magnet motors. In: Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, A. Krawczyk et al. (Eds.), IOS Press, 2006, p. 473-478.
Werner, U., Binder, A.: Rotor dynamic analysis of asynchronous machines including the Finite-Element-Method for engineering low vibration motors, Proc. of the Symposium on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, p. 33-20 – S33-28.
Werner, U.: Rotordynamische Auslegung von überkritisch betriebenen Asynchronmaschinen unter Berücksichtigung der Fundamentsteifigkeit, Tagungsband der Konf. „Elektrisch-mechanische Antriebssysteme“, 27.-28.9.2006, Böblingen, VDI-Berichte 1963, VDI-Verlag, p. 533-546.

zurück