Publikationen 2010

Publikationen 2010

Binder, A., Magdun, O., Gemeinder, Y.: EDM Bearing Currents in Iverter-Fed AC Machines, VDE/ETG-Workshop “Stromrichtergespeiste Elektro-maschinen”; 08.02.2010, Universität Hannover, Germany, p. 73-85.
Binder, A., Magdun, O., Gemeinder, Y.: Overview on the DFGFor575 Research Project, VDE/ETG-Workshop “Stromrichtergespeiste Elektro-maschinen”, 08.02.2010, Universität Hannover, Germany, p. 86-91.
Binder, A., Knopik, Th.: Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge, 3. VDI-Wissensforum Hybrid- und Elektroantriebe für Kraftfahrzeuge, 09.-10.06.2010, Frankfurt/M., Germany, p. 29.
Binder, A.: E-Maschinen für elektrifizierte Triebstränge. Seminar: Grundlagen – Synchronmaschinen für das E-Fahrzeug (RK202) Robert Bosch Kolleg, Stuttgart, 18.01.2010.
De Gersem, H., Henze, O., Weiland, Th., Binder, A.: Simulation of wave propagation effects in machine windings, COMPEL-Journal, Vol. 29, No 1, 2010, p. 23-38.
De Gersem, H., Henze, O., Weiland, Th., Binder, A.: Eddy-current formulation for constructing transmission-line models for machine windings, The European Physical Journal Applied Physics 49, 2010, p. 31101/p1-p7.
Funieru, B., Binder, A.: Simulation of the Air Gap in 3D Models of Electrical Machines, 14th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, 19-22.09.2010, Graz, Austria, p. 373-378.
Funieru, B., Munteanu, G.: High speed PM-Machines. Post-graduate course:
Lappeenranta University of Technology, Finnland, 24.02.2010.
Gessese, Y., Binder, A.: Design and analysis of specific high-speed solid rotor induction motor with copper end rings, 14th IEEE Conference on Electromagnetic Field Computation (IEEE-CEFC), May 9-12, Chicago IL, USA, 4 pages (CD-ROM).
Gessese, Y., Binder, A.: Analysis of the effect of radial rotor surface grooves on rotor losses of high speed solid rotor induction motor, 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 14-16. June 2010, Pisa, Italy, p. 1762-1767.
Magdun, O., Binder, A.: Representation of Iron Core and Dielectric Losses for Calculation of Common Mode Stator Ground Currents in Inverter-Fed AC Machines, 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) May 20-21, 2010, Brasov, Romania, p. 371-376.
Magdun, O., Gemeinder, Y., Binder, A.: Investigation of Influence of Bearing Load and Bearing Temperature on EDM Bearing Currents, IEEE Energy Conversion Congress & Expo (ECCE), September 12-16, 2010, Atlanta, Georgia, p. 2733-2738.
Magdun, O., Gemeinder, Y., Binder, A.: Prevention of Harmful EDM Currents in Inverter-Fed AC Machines by Use of Electrostatic Shields in the Stator Winding Overhang, 36th Annual Conference of the IEEE Industrial Electronics Society – 4th International Conference on E-Learning in Industrial Electronics – IES Industry Forum (IECON-ICELIE) , 7-10 November 2010, Arizona, USA, p. 956-961.
Mink, F., Wang, J., Schuster, M., Bachmann, M.: Aufbau eines Pedelecs und Einsatz im Lehrbetrieb, ETG (VDE) Elektromobilausstellung, Fachtagung – Wettbewerbe, 08.-09.10.2010, Aschaffenburg, Germany, 6 Pages.
Mirzaei, M., Binder, A., Deak, C.: 3D Analysis of Circumferential and Axial Segmentation Effect on Magnet Eddy Current Losses in Permanent Magnet Synchronous Machines with Concentrated Windings, XiX International Conference on Electrical Machines (ICEM), 6-8 September 2010, Rom, Italy, 6 Pages (CD-ROM).
Munteanu, G., Binder, A., Schneider, T., Funieru, B.: No-Load Tests of a 40 kW High-Speed Bearingless Permanent Magnet Synchronous motor, 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) 14.-16. June 2010, Pisa, Italy, p. 1460-1465.
Neudorfer, H., Franz, F.: Simulation and economic evaluation of a bus with serial hybrid drive in comparison to a conventional diesel bus, 7th Braunschweiger Symposium “Hybrid Vehicles, Electric Vehicles and Energy Management”, 24.-25.02.2010, Braunschweig, Germany, p. 280-294.
Obe, E. S.: Steady-state performance of a line-start synchronous reluctance motor with capacitive assistance, ELSEVIER-Journal, Electric Power Systems Research, Vol. 80, Oktober 2010, p. 1240-1246.
Schneider, T., Binder, A.: Entwurf und experimentelle Untersuchung eines lagerlosen
permanenterregten Synchron-Hochdrehzahlmotors für 60000/min, 8. ETG/GMM-Fachtagung “Innovative Klein- und Mikroantriebstechnik” (VDE), 23.09.2010, Würzburg, Germany, ETG-Fachbericht 124, p. 31-36 (CD-ROM).
Takahashi, A., Kikuchi, S., Miyata, K., Wakui, S., Mikami, H., Ide, K., Binder,A.: Dynamic and Steady-State Performance of Line-Starting Permanent Magnet Motors, XiX International Conference on Electrical Machines (ICEM), 6-8 September 2010, Rom, Italy, 6 Pages (CD-ROM).

zurück