Publikationen 2014

Publikationen 2014

Binder, A.: Analytische Auslegung der fremderregten Synchronmaschine, ECPE-Cluster-Seminar “Die fremderregte Synchronmaschine”, 1.-2. 7. 2014, Nürnberg, 38 Seiten
Binder, A.; Canders, W.-R.: High-Speed Drives, Tutorial at the International Conference on Electrical Machines (ICEM), 3.-5. Sept. 2014, Berlin
Deusinger, B.; Lehr, M.; Binder, A.: Determination of efficiency of permanent magnet synchronous machines from summation of losses, Proceedings of the Symposion on Power Electronics and Electrical Drives (SPEEDAM), 18.-20.6.2014, Ischia, Italy, p. 613-618
Funieru, B.; Binder, A.: 3D numerical calculation method of electrical machines with time efficient air gap coupling and stabilized torque and force calculation, Proceedings of the International Conference on Electrical Machines (ICEM), 3.-5. Sept. 2014, Berlin, p. 948-954
Funieru, B.; Binder, A.: Simulation of the Air gap in 3D Models of Electrical machines, Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, 19.-22.9.2010, p. 373 – 378, CD-ROM
Gemeinder, Y.; Schuster, M.; Binder, A; Radnai, B.; Sauer, B.: Calculation and validation of a bearing impedance model for ball bearings and the influence on EDM-currents, Proceedings of the International Conference on Electrical Machines (ICEM), 3.-5. Sept. 2014, Berlin, p. 1798-1804
Lehr, M.; Reis, K.; Binder, A.: Comparison of axial-flux and radial-flux machines for use in wheel-hub drives, JMAG Users Conf.; 24.9.2014, Frankfurt/Main, Germany
Magdun, O.; Binder, A.: High-Frequency Induction Machine Modeling for Common Mode Current and Bearing Voltage Calculation, IEEE Transaction on Industry Applications, 2014, Vol. 50, no.3, p. 1780-1790
Messager, G.; Binder, A.: Comparison of conventional and modified winding for high speed bearingless permanent magnet synchronous motor applications, Proc. Of the 14th Int. Conf. on Optimisation of Electrical and Electronic Equipment (OPTIM), 22.-24.5.2014, Brasov, Romania
Messager, G.; Gemeinder, Y.; Binder, A.: Synthetic test-bench for measurement of bearing-currents in inverter fed drives, Proc. EPE-ECCE 2014, 26.-29.8.2014, Lappeenranta, Finland, 10 pages
Reis, K.; Lehr, M.; Binder, A.: Comparison of axial-flux and radial-flux machines for use in wheel-hub drives, Tagung „Advanced E-Motor Technology 2014“, Frankfurt/Main, 25-26.02.2014
Reis, K.; Binder, A.: Development of a permanent magnet outer rotor direct drive for use in wheel-hub drives, Proceedings of the International Conference on Electrical Machines (ICEM), 3.-5. Sept. 2014, Berlin, p. 2418-2424
Reis, K.; Binder, A.: Konzeptvergleich: Direktmotoren vs. Getriebe-Motoren als Radnabenantriebe, 13. Technischer Tag der VEM-Gruppe, 30.9.-1.10.2014, Wernigerode, CD-ROM
Wang, J.; Binder, A.: Position Estimation for Self-Sensing Magnetic Bearings Based on Double Detection of Current Slopes, Proc. of the 14th Int. Symp. on Magnetic Bearings (ISMB 2014), Linz, Austria, 11.-14.8.2014, p. 673-678

zurück