Publications

ISTN Entries to the TU-Bibliography

RSS-Icon

RSS feed:
For the ISTN entries to the TU-Bibliography a RSS Feed is available.

Before 2002:
Publications of 2001 and older can be viewed as download.

 
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Date | Creator(s) | Item type
Jump to: 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996
Es werden nur Einträge angezeigt, bei denen keine untergeordnete Organisationseinheit ausgewählt wurde. Anzahl: 343.

2020

An, Jeongki (2020):
Design of a permanent magnet synchronous machine for hybrid electric vehicles with twin electric machines and a range extender.
Darmstadt, Technische Universität,
DOI: 10.25534/tuprints-00011826,
[PhD thesis]

Lehr, Marcel (2020):
Auslegung und Bewertung elektrischer Maschinen mit Permanentmagneten im Stator für hohe Drehmomentdichten.
Darmstadt, Technische Universität Darmstadt,
DOI: 10.25534/tuprints-00011751,
[PhD thesis]

2019

Li, Xing (2019):
Evaluation and Design of a Flywheel Energy Storage System.
Darmstadt, Technische Universität,
DOI: 10.25534/tuprints-00009461,
[PhD thesis]

Dietz, Daniel ; Binder, Andreas (2019):
Influence of PM-Material on the parameter uncertainty of Bearingless Synchronous Machines.
S. 80, VDE, 12. Fachtagung Innovative Klein- und Mikroantriebstechnik (IKMT 2019); 12. ETG/GMM-Symposium, Würzburg, Deutschland, 10.-11.09., ISBN 978-3-8007-5062-7,
[Conference item]

Messager, Gael (2019):
Self-bearing permanent magnet synchronous machine configurations and control for high-speed applications.
Darmstadt, Technische Universität,
[PhD thesis]

Dietz, Daniel ; Binder, Andreas (2019):
Bearingless PM synchronous machine with zero-sequence current driven star point-connected active magnetic thrust bearing.
Proceedings of the International Conference MAGLEV, St. Petersburg, Russland, 05. - 08.09.2018, [Conference item]

Erd, Nicolas ; Binder, Andreas (2019):
Eddy Currents in Solid Rotor under Spatially Intermittent Feeding of the Stator Winding.
S. 178-184, Proceedings of the International Conference on Electrical Machines, Alexandroupoli, Griechenland, 03. - 06.09.2018, [Conference item]

Erd, Nicolas ; Binder, Andreas (2019):
Numerical and Analytical Analysis of Wave Harmonics under Spatially Intermittent Feeding.
S. 297-303, Proceedings of the International Conference on Electrical Machines, Alexandroupoli, Griechenland, 03. - 06.09.2018, [Conference item]

Gemeinder, Yves ; An, Jeongki ; Binder, Andreas (2019):
Concept Study of the electrical machines for the twin-drive range- extender propulsion system (DE-REX).
S. 67-71, 10th Expert Forum E-MOTIVE, Int. Conf. on Electric Vehicle Drives, Stuttgart, 12. - 13.09.2018, [Conference item]

Lehr, Marcel ; Binder, Andreas (2019):
Comparison of Different Synchronous Machines with Stator-Side Permanent Magnets for Industrial Drive Application.
9th Int. Conf. on Power Electronics, Machines and Drives, Liverpool, UK, 17. - 19.4.2018, [Conference item]

Neusüs, Sascha ; Binder, Andreas (2019):
Operation Strategy and Efficiency Map Calculation of a Synchronous Reluctance Motor.
S. 318-324, Proceedings of the International Conference on Electrical Machines, Alexandroupoli, Griechenland, 03. - 06.09.2018, [Conference item]

Schuster, Martin ; Binder, Andreas (2019):
Comparison of an 1.1 kW-induction machine and a 1.5 kW-PMSM regarding common mode bearing currents.
Proceedings of the Symposion on Power Electronics and Electrical Drives, Amalfi, Italien, 20. - 22.06.2018, [Conference item]

2018

Dietz, Daniel ; Messager, Gael ; Binder, Andreas (2018):
A 1 kW/60000 min-1 bearingless PM motor with combined winding for torque and rotor suspension.
In: IET Electric Power Applications Journal, 12 (8), S. 1090-1097. [Article]

Neusüs, Sascha ; Binder, Andreas (2018):
Numerical evaluation of permanent Magnet assisted synchronous reluctance rotor topologies using a simplified magnetostatic model.
11th International Symposium on Electric and Magnetic Fields, Darmstadt, 10.-12.04.2018, [Conference item]

An, Jeongki ; Binder, Andreas (2018):
Operation strategy with thermal management of E-machines in pure electric driving mode for twin-drive-transmission (DE-REX).
IEEE-VPPC 2017, Belfort (France), 11.-14.12.2017, [Conference item]

Binder, Andreas ; Schuster, Martin ; Erd, Nicolas (2018):
Expected du/dt-effects in electrical machines fed by SiC-inverter.
Proc. Of the German-Corean Symp. 2017 on Power Electronics and Electrical Drives, Berlin (Germany), 30.06.-01.07.2017, [Conference item]

Deusinger, Björn ; Binder, Andreas (2018):
Bestimmung des Wirkungsgrads von permanentmagneterregten Synchronmaschinen im Einzelverlustverfahren.
16. Technischer Tag der VEM-Gruppe, Wernigerode (Deutschland), 10.-11.10.2017, [Conference item]

Deusinger, Björn ; Binder, Andreas (2018):
Quantitative Analysis and Finite Element Modeling for Indirect Efficiency Determination of Permanent Magnet Machines.
10th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS), Rome (Italy), 06.-08.09.2017, [Conference item]

Dietz, Daniel ; Binder, Andreas (2018):
Critical review on the benefits of C- and E-Core Flux-Switching-PM-Machines.
Proc. 19th Int. Conf. El. Drives & Power Electr. (EDPE 2017), Dubrovnik (Croatia), 04.-06.10.2017, [Conference item]

Erd, Nicolas ; Li, Xing ; Binder, Andreas (2018):
Power Flow Simulation of Flywheel Energy Storage Systems for Tramways.
ICREPQ 2017, Malaga (Spain), 04.-06.04.2017, [Conference item]

Gemeinder, Yves ; Binder, Andreas (2018):
Konstruktion und Aufbau einer IPMSM für den Doppel-E-Antrieb mit Range Extender (DE-REX).
10. Tagung „El. Antriebstechnologie für Hybrid- und Elektrofahrzeuge“, Würzburg (Deutschland), 27.-28.09.2017, [Conference item]

Lehr, Marcel ; Binder, Andreas (2018):
Auslegung und Vermessung einer permanentmagneterregten Flux-Switching-Machine als Industrieantrieb (Design and measurements of a permanent magnet Flux-switching-Machine for industrial applications).
More Drive Symp., Wien (Österreich), 25.-26.01.2017, [Conference item]

Lehr, Marcel ; Dietz, Daniel ; Binder, Andreas (2018):
Electromagnetic design of a permanent magnet Flux-Switching-Machine as a direct-driven 3 MW wind power generator.
Int. Conf. on Industrial Technology (ICIT 2018), Lyon (France), 20.-22.02.2018, [Conference item]

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2018):
Design and Calculation of a 130 kW High-Speed Permanent Magnet Synchronous Machine in Flywheel Energy Storage Systems for Urban Application.
Proc. of the Int. Conf. Clean Electrical Power (IEEE-ICCEP), Santa Margherita Ligure (Italy), 27.-29.06.2017, [Conference item]

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2018):
Design of a High-Speed Flywheel Energy Storage Demonstrator.
Konf. „Antriebssysteme 2017 – Elektrik, Mechanik, Fluidtechnik in der Anwendung“, Karlsruhe (Deutschland), 22.11.2017, [Conference item]

Messager, Gael ; Binder, Andreas (2018):
Derivation of forces and force interferences in a Double Conical High-Speed Bearingless Permanent magnet Synchronous Motor (CD-ROM).
IEEE IEMDC 17, Miami (USA), 21.-04.05.2017, [Conference item]

Neusüs, Sascha ; Binder, Andreas (2018):
Design studies of synchronous reluctance machines.
JMAG Users Conf. 2017, Paris (France), 08.11.2017, [Conference item]

Neusüs, Sascha ; Binder, Andreas (2018):
Shaping and dimensioning of the flux barriers in synchronous reluctance machines.
S. 509-516, OPTIM 2017, Brasov (Romania), 25.-27.05.2017, [Conference item]

Schuster, Martin ; Binder, Andreas (2018):
Bearing currents of a 2.4 kW-PM synchronous motor fan drive with integrated frequency inverter.
Proc. EPE-ECCE EUROPE 2017, Warsaw (Poland), 11.-14.09.2017, [Conference item]

Neusüs,, Sascha ; Binder, Andreas (2018):
Design of a synchronous reluctance rotor for the stator of an 11 kW induction machine.
In: e&i 135, S. 177-186. [Article]

Dietz, Daniel ; Messager, Gael ; Binder, Andreas (2018):
1 kW / 60000/min bearingless PM synchronous machine with zero-sequence current driven star point-connected active magnetic thrust bearing.
In: Transportation Systems and Technology, S. 5-18. [Article]

Rinderknecht, Stephan ; Binder, Andreas (2018):
Doppel-E-Antrieb mit Range-Extender (DE-REX).
3, In: Z! Das Zukunftsmagazin, S. 30-31. [Article]

2017

Messager, Gael ; Binder, Andreas (2017):
"Six-Axis Rotor Magnetic Suspension Principle for Permanent Magnet Synchronous Motor with Control of the Positive, Negative and Zero-Sequence Current Components".
Proceedings on Advances in Magnetics (AIM), Bormio, Italy, 14.-16.03.2016, [Conference item]

Lehr, Marcel ; Binder, Andreas ; Ohl, E. (2017):
Design and Construction of a permanent magnet excited Flux-Switching-Machine.
S. 112-117, 6th Electric Drives Production Conference and Exhibition, Nürnberg Germany, 30.11.-1.12.2016, [Conference item]

An, Jeongki ; Gemeinder, Yves ; Binder, Andreas (2017):
Doppel-E-Antrieb mit Range-Extender (DE-REX).
8. Expertenforum E-Motive (FVA), Schweinfurt, Germany, 07.-08.09.2016, [Conference item]

Bergmann, G. ; Binder, Andreas (2017):
Design Guidelines of Bearingless PMSM with Two Separate Poly-Phase Windings.
S. 2590-2596, Proceedings of the International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07.09.2016, [Conference item]

Binder, Andreas (2017):
High frequency effects in inverter-fed AC electric machinery.
Tutorial at the International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07.09.2016, [Conference item]

Deusinger, Björn ; Binder, Andreas (2017):
Different rotor geometry concepts for high pole count permanent magnet machines with buried magnets.
24th Int. Workshop on Rare-Earth and Future Permanent Magnets and their Applications (REPM), Darmstadt, 29.08.-01.09.2016, [Conference item]

Gemeinder, Yves ; Binder, Andreas (2017):
Analyse von Betriebsparametereinflüssen auf Lagerströme durch Monitoring.
15. Technischer Tag der VEM-Gruppe, Wernigerode, Germany, 18.-19.10.2016, [Conference item]

Lehr, Marcel ; Woog, Daniel ; Binder, Andreas (2017):
Design, construction and measurements of a permanent magnet axial flux machine.
S. 1606-1612, Proceedings of the International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07.09.2016, [Conference item]

Messager, Gael ; Binder, Andreas (2017):
Observer based Pole Placement Control for a Double Conical High-Speed Bearingless Permanent Magnet Synchronous Motor.
17th Europ. Conf. On Power Electronics and Applications (EPE 2016), Karlsruhe, Germany, 04.-07.09.2016, [Conference item]

Schuster, Martin ; Masendorf, Daniel ; Binder, Andreas (2017):
Two PMSMs and the influence of their geometry to common-mode bearing currents.
S. 2128-2134, Proceedings of the International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07.09.2016, [Conference item]

Binder, Andreas (2017):
Elektrische Maschinen und Antriebe - Übungsbuch 2017 2. erweiterte Auflage.
Heidelberg, Springer Verlag, [Book]

Lehr, Marcel ; Binder, Andreas (2017):
Design and measurements of a permanent magnet Flux-switching-Machine for industrial applications.
In: e&i, (134), S. 177-184. [Article]

2016

An, Jeongki ; Binder, Andreas (2016):
Analysis of sudden short-circuit of interior permanent magnet synchronous machines.
S. 255-260, Proceedings of the Symposium on Power Electronics and Electrical Drives SPEEDAM, Capri, Italy, 22.-24.06.2016, [Conference item]

An, Jeongki ; Binder, Andreas (2016):
Permanent magnet synchronous machine design for hybrid electric cars with double e-motor and range extender.
133, In: e&i 133, (2), S. 65-72. [Article]

Binder, Andreas ; Messager, Gael (2016):
Analysis of sudden short-circuit of interior permanent magnet synchronous machines.
CD-ROM, Proceedings of Advances in Magnetics (AIM), Bormio, Italy, 14.-16.03.2016, [Conference item]

Lehr, Marcel ; Woog, D. ; Binder, Andreas (2016):
Design and measurements of a prototype axial flux machine.
Proc. Powersys UG, Aix-en-Provence, France, 9.-10.06.2016, [Conference item]

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2016):
Evaluation of Flywheel Energy Storage Systems for Residential Photovoltaic Installations.
S. 255-260, Proceedings of the Symposium on Power Electronics and Electrical Drives (SPEEDAM), Capri, Italy, 22.-24.06.2016, [Conference item]

Reis, Kersten ; Binder, Andreas (2016):
Comparison of direct drive and high speed drive concepts for the use in wheelhub-drives.
CD-ROM, International Conference Power Electronics Machines and Drives (PEMD), Glasgow UK, 19.-21.04.2016, [Conference item]

An, Jeongki ; Gemeinder, Yves ; Viehmann, Andreas ; König, Ruben ; Fischer, S. ; Binder, Andreas ; Rinderknecht, Stephan ; Beidl, Christian (2016):
Doppel-E-Antrieb mit Range-Extender (DE-REX) - System-Auslegung und Betriebsstrategien am Beispiel der eingesetzten Permanentmagnet-Synchronmaschinen.
S. 51-65, VDI-Fachtagung Innovative Antriebe, Dresden, 23. - 24. November 2016, [Conference item]

Wang, Jinou ; Binder, Andreas (2016):
Position estimation for self-sensing magnetic bearings based on the current slope due to the switching power amplifier.
26, In: EPE Journal, (4), S. 125-141. [Article]

2015

Wang, Jinou ; Binder, Andreas (2015):
Magnetlager und Verfahren zum kontaktlosen Halten eines Körpers.
[Norm, Patent, Standard]

Lehr, Marcel ; Binder, Andreas (2015):
Auslegung einer permanentmagneterregten Flux-Switching-Maschine als Industrieanbtrieb.
VDI/VDE Tagung Antriebssysteme, Aachen, Germany, 11.-12.11.2015, [Conference item]

Funieru, Bogdan ; Binder, Andreas (2015):
Simulation of Electrical Machines End Effects with Reduced Length 3D FEM Models.
ICEM 2012, Marseille, France, 2-4.9.2012, [Conference item]

Gessese, Y. ; Binder, Andreas (2015):
Design and analysis of specific high-speed solid rotor induction motor with copper end rings.
IEEE-CEFC 2010, Chicago, 9.-12.5.2010, [Conference item]

Munteanu, G. ; Binder, Andreas ; Schneider, T. ; Funieru, Bogdan (2015):
No-load tests of a 40 kW High-Speed Bearingless Permanent Magnet Synchronous Motor.
S. 1460-1465, 20th Int. Symp. On Power Electronics, Ele. Drives, Automation and Motion SPEEDAM 2010, Pisa, Italy, 14.-16. June 2010, [Conference item]

Binder, Andreas ; Lehr, Marcel (2015):
"Vergleich verschiedener elektrischer Maschinen mit Permanentmagneten im Stator zum Einsatz als Industrieantrieb".
VEM Technischer Tag 2015, Wernigerode, Deutschland, 15.-16.09.2016, [Conference item]

Messager, Gael ; Mink, F. ; Becker, T. ; Wang, J. ; Binder, Andreas (2015):
Control Interference of Electrical Machines with Double-Star Winding Systems Driven by Independent Current Controllers.
S. 1-10, 17th European Conference on Power Electronics and Applications (EPE 15 ECCE-Europe), Geneva, 8.-10.9.2015, [Conference item]

Lehr, Marcel ; Neusüs, Sascha ; Binder, Andreas (2015):
Design and parametric modelling of a synchronous reluctance machine.
JMAG Users Conference, Frankfurt/Main, Germany, 27.-28.05.2015, [Conference item]

Binder, Andreas ; An, Jeongki ; König, Ruben (2015):
Drive concept and motor design of a double-E-drive for hybrid electric vehicles.
Advanced E-Motor Technology 2015, Frankfurt, Deutschland, 24.-26. Februar 2015, [Conference item]

An, Jeongki ; Binder, Andreas (2015):
Design of Interior Permanent Magnet Synchronous Machine for Two-Drive-Transmission.
Proc. of the 3rd Int. Conf. on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles (ESARS), Aachen, Germany, 3.-5. 3. 2015, [Conference item]

An, Jeongki ; König, R. ; Binder, Andreas (2015):
Drive concept and motor design of a double E-drive for hybrid electric vehicles.
Tagung „Advanced E-Motor Technology 2015“, Frankfurt/Main, 24-26.02.2015, [Conference item]

Deusinger, Björn ; Binder, Andreas (2015):
Indirect efficiency determination of permanent magnet synchronous machines for sine wave and inverter operation.
9th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS), Helsinki, 15.-17.9.2015, [Conference item]

Lehr, Marcel ; Reis, Kersten ; Binder, Andreas (2015):
Comparison of axial flux and radial flux machines for the use in wheel hub drives.
132, In: e&i, (1), S. 25-32. [Article]

Messager, Gael ; Binder, Andreas (2015):
Evaluation of a Dual Half-Pitched Three-Phase Bearingless High-Speed Permanent Magnet Synchronous Motor Prototype.
S. 83-88, 10. GMM/ETG-Fachtagung Innovative Klein- und Mikroantriebstechnik (IKMT), Köln, 14.-15.9.2015, [Conference item]

Obe, E. S. ; Binder, Andreas (2015):
Direct-phase-variable model of a synchronous reluctance motor including all slot and winding harmonics.
52, In: Energy Conversion and Management, S. 284-291. [Article]

Radnai, B. ; Gemeinder, Yves ; Kiekbusch, T. ; Sauer, B. ; Binder, Andreas (2015):
Schädlicher Stromdurchgang - Untersuchung des Schädigungsmechanismus und der zulässigen Lagerstrombelastung von Wälzlagern in E-Motoren und Generatoren verursacht durch parasitäre hochfrequente Lagerströme.
In: FVA-Heft 1127, Forschungsvorhaben Nr. 650 I, Forschungsvereinigung Antriebstechnik e.V., Frankfurt /Main, [Article]

Schuster, Martin ; Binder, Andreas (2015):
Comparison of different inverter-fed AC motor types regarding common mode bearing currents.
S. 2762-2768, 7th IEEE Energy Conversion Congress and Exposition (ECCE2015), Montreal, 20.-24.9.2015, [Conference item]

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Binder, Andreas (2015):
Asynchronous Torque of Line-Starting Permanent-Magnet Synchronous Motors.
30, In: IEEE Transaction on Energy Conversion, (2), S. 498-506. [Article]

2014

Reichert, K. ; Binder, Andreas (2014):
Elektrische Maschinenen und Antriebe - Auswahl, Auslegung und Dimensionierung.
In: VDE-Kursreihe "Lebenslanges Lernen", [Book]

Hagen, Reinhard (2014):
Die Berechnung der Drehstrom-Käfigläufer-Asynchronmaschine mit Berücksichtigung der Zusatzverluste bei Netz- und Umrichterbetrieb.
Darmstadt, Germany, ULB Darmstadt, TU Darmstadt,
[PhD thesis]

Mouratidis, Panagiotis (2014):
Design and Implementation of Modern Controls for Drive and Suspension of a High Speed Double Conical Bearingless Motor on a Real-Time System.
TU Darmstadt, [Master thesis]

Binder, Andreas (2014):
Analytische Auslegung der fremderregten Synchronmaschine.
ECPE-Cluster-Seminar “Die fremderregte Synchronmaschine”, Nürnberg, 1.-2. 7. 2014, [Conference item]

Binder, Andreas ; Canders, W.-R. (2014):
High-Speed Drives.
Tutorial at the International Conference on Electrical Machines (ICEM), Berlin, 3.-5. Sept. 2014, [Conference item]

Deusinger, Björn ; Lehr, Marcel ; Binder, Andreas (2014):
Determination of efficiency of permanent magnet synchronous machines from summation of losses.
S. 613-618, Proceedings of the Symposion on Power Electronics and Electrical Drives (SPEEDAM), Ischia, Italy, 18.-20.6.2014, [Conference item]

Funieru, Bogdan ; Binder, Andreas (2014):
3D numerical calculation method of electrical machines with time efficient air gap coupling and stabilized torque and force calculation.
S. 948-954, Proceedings of the International Conference on Electrical Machines (ICEM), Berlin, 3.-5. Sept. 2014, [Conference item]

Gemeinder, Yves ; Schuster, Martin ; Binder, Andreas ; Radnai, B. ; Sauer, B. (2014):
Calculation and validation of a bearing impedance model for ball bearings and the influence on EDM-currents.
S. 1798-1804, Proceedings of the International Conference on Electrical Machines (ICEM), Berlin, 3.-5. Sept. 2014, [Conference item]

Lehr, Marcel ; Reis, Kersten ; Binder, Andreas (2014):
Comparison of axial-flux and radial-flux machines for use in wheel-hub drives.
JMAG Users Conf.; 24.9.2014, Frankfurt/Main, Germany, 24.9.2014, [Conference item]

Magdun, O. ; Binder, Andreas (2014):
High-Frequency Induction Machine Modeling for Common Mode Current and Bearing Voltage Calculation.
50, In: IEEE Transaction on Industry Applications, (3), S. 1780-1790. [Article]

Messager, Gael ; Binder, Andreas (2014):
Comparison of conventional and modified winding for high speed bearingless permanent magnet synchronous motor applications.
Proc. Of the 14th Int. Conf. on Optimisation of Electrical and Electronic Equipment (OPTIM), Brasov, Romania, 22.-24.5.2014, [Conference item]

Messager, Gael ; Gemeinder, Yves ; Binder, Andreas (2014):
Synthetic test-bench for measurement of bearing-currents in inverter fed drives.
Proc. EPE-ECCE 2014, Lappeenranta, Finland, 26.-29.8.2014, [Conference item]

Reis, Kersten ; Binder, Andreas (2014):
Development of a permanent magnet outer rotor direct drive for use in wheel-hub drives.
S. 2418-2424, Proceedings of the International Conference on Electrical Machines (ICEM), Berlin, 3.-5. Sept. 2014, [Conference item]

Reis, Kersten ; Binder, Andreas (2014):
Konzeptvergleich: Direktmotoren vs. Getriebe-Motoren als Radnabenantriebe.
13. Technischer Tag der VEM-Gruppe, Wernigerode, 30.9.-1.10.2014, [Conference item]

Reis, Kersten ; Lehr, Marcel ; Binder, Andreas (2014):
Comparison of axial-flux and radial-flux machines for use in wheel-hub drives.
Tagung „Advanced E-Motor Technology 2014, Frankfurt/Main, 25-26.02.2014, [Conference item]

Wang, J. ; Binder, Andreas (2014):
Position Estimation for Self-Sensing Magnetic Bearings Based on Double Detection of Current Slopes.
S. 673-678, Proc. of the 14th Int. Symp. on Magnetic Bearings (ISMB 2014), Linz, Austria, 11.-14.8.2014, [Conference item]

2013

König, Ruben ; Rinderknecht, Stephan ; Anderson, J. A. ; Binder, A. (2013):
Effizienzsteigerung durch optimale Abstimmung von Getriebe und E-Maschinen am Beispiel des Two-Drive-Transmission.
Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge, München, Deutschland, 26.-27. November 2013, [Conference item]

Magdun, O. ; Blatt, S. ; Binder, Andreas (2013):
Calculation of Stator Winding Parameters to Predict the Voltage Distributions in Inverter Fed AC Machines.
S. 697-703, 9th IEEE Int. Symp. On Diagnostics for Electric Machines, Power Electronics and Drives (IEEE-SDEMPED), Valencia, Spain, 30 Aug. 2013, [Conference item]

Knopik, Thomas (2013):
Steigerung des Wirkungsgrads und der Ausnutzung von Norm-Asynchronmotoren mit Kurzschlusskäfig.
Darmstadt, Germany, ULB Darmstadt, TU Darmstadt,
[PhD thesis]

An, Jeongki ; Binder, Andreas ; Sabirin, C. R. (2013):
Loss measurement of a 30 kW High Speed Permanent Magnet Synchronous Machine with Active Magnetic Bearings.
S. 905-910, Proc. of the Int. Conf. ICEMS 2013, Busan, Corea, 22-24.10.2013, [Conference item]

Binder, Andreas (2013):
Hochdrehzahlantriebe und mögliche Einsatzgebiete.
Technisches Kolloquium „Welten von morgen", Igersheim-Harthausen, 27.6.2013, [Conference item]

Funieru, Bogdan ; Binder, Andreas (2013):
Design of a PM Direct Drive Synchronous Generator used in a Tidal Stream Turbine.
S. 197-202, Proc. of the Int. Conf. Clean Electrical Power (IEEE-ICCEP), Alghero, Sardegna, Italy, 11.-13. 6. 2013, [Conference item]

Funieru, Bogdan ; Esteves-Albieri, G. ; Binder, Andreas (2013):
Design of a Reduced Size Demonstrator Used for Validation of the Direct Drive Wind Generator Loss Calculation Models.
20, In: Electromotion, S. 183-188. [Article]

Gemeinder, Yves ; Magdun, O. ; Binder, Andreas (2013):
Schmierstoffeinfluss auf EDM-Lagerströme und Maßnahmen zu ihrer Verringerung.
12. Technischer Tag der VEM-Gruppe, Wernigerode, 24-25.9.2013, [Conference item]

Janjic, B. ; Binder, Andreas (2013):
Optimierung eines magnetisch gelagerten integrierten Antriebs für eine Axialpumpenstufe aus strömungstechnischer Sicht.
S. 108-115, Elektrisch-mechanisch-hydraulische Antriebssysteme 2013, Nürtingen, 17-18.9.2013, [Conference item]

Knopik, T. ; Binder, Andreas ; Lehr, Marcel (2013):
Auslotung maximal erreichbarer Wirkungsgrade von vierpoligen Käfigläufer-Normasynchronmotoren im Leistungsbereich von 15 kW.
Int. ETG-Kongress 2013, Berlin, Deutschland, 5.-6.11. 2013, [Conference item]

König, R. ; An, Jeongki ; Binder, Andreas ; Rinderknecht, Stephan (2013):
Effizienzsteigerung durch optimale Abstimmung von Getriebe und E-Maschine am Beispiel des Two-Drive-Transmission.
In: expert-Verlag, Editor: Haus der Technik Essen, 131, S. 85-97, Tagung „Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge“, München, 26-27.11.2013, [Conference item]

Magdun, O. ; Binder, Andreas (2013):
Rotor Impedance of the High-Frequency Circulating Bearing Current Path in Inverter-Fed AC Machines.
S. 3512-3519, IEEE Energy Conversion Congress and Exposition (IEEE-ECCE 2013), Denver, Colorado, USA, 15-19.9.2013, [Conference item]

Magdun, Oliver Narcis (2013):
Calculation of high-frequency current distributions in inverter-fed electrical machines.
Hrzogenrath, Shaker, TU Darmstadt, ISBN 978-3-8440-1694-9,
[PhD thesis]

Mink, F. ; Binder, Andreas ; Beineke, S. ; Lutz, J. (2013):
Regelung von PM-Synchronmaschinen unter Berücksichtigung von Sättigungseffekten.
Proc. Fachkonferenz Elektrische Automatisierung SPS/IPC/Drives, Nürnberg, 26.-28. Nov. 2013, [Conference item]

Reis, Kersten ; Binder, Andreas (2013):
Radnabenantriebe als Antriebskonzept für Elektrofahrzeuge.
In: expert-Verlag, Editor: Haus der Technik Essen, 131, S. 72-84, Tagung „Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge“, München, 26-27.11.2013, [Conference item]

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2013):
Reluctance Torque Utility of Line-Starting Permanent Magnet Motors.
28, In: IEEE Transaction on Energy Conversion, (4), S. 805-814. [Article]

Wang, J. ; Binder, Andreas (2013):
Current slope calculation in FPGA for sensorless control technique and associated slope based predictive precise current control.
United Symp. SLED 2013 & PRECEDE 2013, Munich, Germany, 17.-19.10.2013, [Conference item]

Wang, J. ; Binder, Andreas (2013):
Self-sensing magnetic bearings using multiple sampling of currents alone.
Proc. European Conference on Power Electronics (EPE), Lille, France, 3.-5.9.2013, [Conference item]

2012

Munteanu, G. ; Binder, Andreas (2012):
Bearingless PM Motor Levitation Systems.
Proc. of the Int. Conf. ICEMS 2012, Sapporo, Japan, 22.-24.10.2012, [Conference item]

Mink, Fabian ; Kubasiak, Nicolai ; Ritter, Bastian ; Binder, Andreas (2012):
Parametric model and identification of PMSM considering the influence of magnetic saturation.
S. 444-452, Proceedings of the 13th IEEE International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2012, [Conference item]

Binder, Andreas (2012):
Elektrische Maschinen und Antriebe.
Springer-Verlag Berlin-Heidelberg, [Book]

Binder, Andreas (2012):
Elektrische Maschinen und Antriebe - Übungsbuch.
Springer-Verlag Berlin-Heidelberg, [Book]

Binder, Andreas ; Munteanu, G. (2012):
Fünfachsige magnetische Lagerung mit zwei konischen lagerlosen PM-Synchron-Halbmotoren.
11. Technischer Tag der VEM-Gruppe, Wernigerode, 25.-26 .9.2012, [Conference item]

Deak, Csaba Zsolt (2012):
Modular permanent-magnet synchronous motors with high electromagnetic utilization.
Aachen, Shaker, TU Darmstadt, ISBN 978-3-8440-0958-3,
[PhD thesis]

Dewenter, S. ; Binder, Andreas ; Strauch, M. (2012):
Simulation model for a serial hybrid bus and comparison with measurements of the real bus.
S. 863-868, IEEE-VPPC 2012, Seoul, Korea, Oct. 9-12 2012, [Conference item]

Gholizad, H. ; Binder, Andreas (2012):
Design and Modelling of a Variable Impedance Induction Motor.
S. 120-125, SPEEDAM 2012, Sorrento, Italy, 20.-22.6.2012, [Conference item]

Magdun, O. ; Binder, Andreas (2012):
The High-Frequency Induction Machine Parameters and Their Influence on the Common Mode Stator Ground Current.
ICEM 2012, Marseille, France, 2-4.9.2012, [Conference item]

Magdun, O. ; Binder, Andreas (2012):
An iron Core Impedance Model for Calculating High Frequency Common Mode Currents and Shaft Voltages in Inverter-Fed AC Machines.
S. 135-140, SPEEDAM 2012, Sorrento, Italy, 20.-22.6.2012, [Conference item]

Mirzaei, M. ; Binder, Andreas ; Funieru, Bogdan ; Susic, M. (2012):
Analytical Calculations of Induced Eddy Currents Losses in the Magnets of Surface Mounted PM Machines with Consideration of Circumferential and Axial Segmentation Effects.
12, In: IEEE Trans. on Magnetics 48, S. 4831-4841. [Article]

Munteanu, G. ; Binder, Andreas ; Dewenter, S. (2012):
Five-Axis Magnetic Suspension with Two Conical Air Gap Bearingless PM Synchronous Half-Motors.
S. 1246-1251, SPEEDAM 2012, Sorrento, Italy, 20.-22.6.2012, [Conference item]

Strauch, M. ; Dewenter, S. ; Binder, Andreas ; Nam, K. H. (2012):
Calculation of the electromagnetic characteristics of an electrically excited synchronous motor for an EV.
S. 1086-1091, IEEE-VPPC 2012, Seoul, Korea, Oct. 9-12, [Conference item]

Strauch, M. ; Klumpp, N. ; Binder, Andreas (2012):
Parameteridentifikation und Modellierung von Lithium-Eisen-Phosphat-Akkumulatoren für die Verwendung in Modellen elektrischer Fahrzeuge.
Elektromobilitätsausstellung (EMA, Nürnberg, 21.-22.9.2012, [Conference item]

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2012):
d-q- Space Vector Analysis for Line-Starting Permanent Magnet Synchronous Motors.
ICEM 2012, Marseille, 2-4.9.2012, [Conference item]

2011

Purcarea, Calin (2011):
High-frequency parasitic effects in electric drives with long cables.
Darmstadt, Institut für Stromrichtertechnik und Antriebsregelung,
[PhD thesis]

Aoulkadi, M'hamed (2011):
Experimental Determination of Stray Load Losses in Cage Induction Machines.
TU Darmstadt, Institut für Elektrische Energiewandlung,
[PhD thesis]

Binder, Andreas ; Funieru, Bogdan ; Mirzaei, M. ; Zamzow, B. ; Waidhauser, R. (2011):
Forces Analysis in a Large Linear Synchronous Motor.
8th Int. Symp. On Linear Drives for Industry Application LDIA 2011, Eindhoven, Netherlands, 3.-6.7.2011, [Conference item]

Binder, Andreas ; Knopik, T. (2011):
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
3. VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge“, Frankfurt/Main, 16.-17.11.2011, [Conference item]

Binder, Andreas ; Munteanu, G. (2011):
Entwicklung und Erprobung von lagerlosen Hochdrehzahl-PM-Synchronmaschinen,.
10. Technischer Tag der VEM-Gruppe, Wernigerode, 27.-28.9.2011, [Conference item]

Dewenter, S. ; Binder, Andreas ; Holub-Krappe, E. (2011):
Green Move – Hybridbusse für Darmstadt.
S. 1-14, Techn. Tagung „Hybridnahverkehrsbusse“, Haus der Technik, 27.-28.9.2011, [Conference item]

Funieru, Bogdan ; Mirzaei, M. ; Binder, Andreas (2011):
Full and Simplified Loss Calculation FEM Models for Segmented Surface Permanent Magnet Machines.
Proc. of the Int. Conf. COMPUMAG, Sydney, Australia, 12.-15.7.2011, [Conference item]

Gholizad, H. ; Binder, Andreas (2011):
Analytical Modelling of variable Impedance Induction Machines.
Proc. of the Int. Conf. IEEE-IEMDC, Niagara Falls, Canada, 15.-18.5.2011, [Conference item]

Gholizad, H. ; Binder, Andreas (2011):
Measurement results of a Variable Impedance Induction Motor prototype.
In: VDI-Berichte 2138, VDI-Verlag, S. 13-22, Tagungsband der Konf. „Elektrisch-mechanisch-hydraulische Antriebssysteme, Nürtingen, 13.-14.9.2011, [Conference item]

Knopik, T. ; Binder, Andreas (2011):
Einsatz einer mehrphasigen Wicklung in Stern-Polygon-Mischschaltung für Kurzschlussläufer-Asynchronmotoren zur Steigerung der Energieeffizienz.
In: VDI-Berichte 2138, VDI-Verlag, S. 23-34, Tagungsband der Konf. „Elektrisch-mechanisch-hydraulische Antriebssysteme, Nürtingen, 13.-14.9.2011, [Conference item]

Knopik, T. ; Binder, Andreas (2011):
Investigations on a combined star-polygon poly-phase winding for an induction machine to reduce parasitic harmonic effects.
S. 1-14, Proc. of the 7th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS), Alexandria, USA, 12.-14.9.2011, [Conference item]

Knopik, T. ; Binder, Andreas (2011):
Measurement proofed analytical and numerical models for calculation of the teeth flux pulsations and harmonic torques of skewed squirrel cage standard induction machines.
S. 162-169, IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, Arizona, 17.-22.9.2011, [Conference item]

Knopik, T. ; Binder, Andreas (2011):
Prediction of the sound power levels of squirrel cage induction machines in different operation points taking into account mechanical boundary conditions for modal analysis.
Proc. of the European Conference on Power Electronics (EPE2011), Birmingham, UK, 30.8.-1.9.2011, [Conference item]

Magdun, O. ; Gemeinder, Yves ; Binder, Andreas ; Reis, Kersten (2011):
Calculation of Bearing and Common-Mode Voltage for Prediction of Bearing Failures Caused by EDM Currents.
8th IEEE Int. Symp. On Diagnostics for Electric Machines, Power Electronics and Drives (IEEE-SDEMPED), Bologna, Italy, 5-8 Sept. 2011, [Conference item]

Mink, F. ; Binder, Andreas (2011):
Parametric Model of PMSM Considering the Influence of Magnetic Saturation.
S. 67-73, Korea-Germany Joint Symposium on Power Electronics, TU München, 24-29 Aug. 2011, [Conference item]

Mirzaei, M. ; Funieru, Bogdan ; Binder, Andreas (2011):
Analysis of contact resistance effect between magnet segments on eddy current losses.
S. 66-67, Proc. of the 8th Int. Conf. on Computation in Electromagnetics CEM 2011, Wroclaw, Poland, 11-14.4.2011, [Conference item]

Munteanu, G. ; Binder, Andreas ; Schneider, T. (2011):
Development and Test of High-Speed Bearingless PM Synchronous Machines.
128, In: e&i, S. 217-227. [Article]

Munteanu, G. ; Binder, Andreas ; Schneider, T. (2011):
Losses Measurement of a 40 kW High-Speed Bearingless PM Synchronous Motor.
S. 722-729, IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, Arizona, USA, 17-22.9.2011, [Conference item]

2010

Magdun, O. (2010):
Representation of Iron Core and Dielectric Losses for Calculation of Common Mode Stator Ground Currents in Inverter-Fed AC Machines.
S. 371-376, OPTIM 2010, Brasov, Rumänien, May 20-22 2010, [Conference item]

Binder, Andreas ; Knopik, T. (2010):
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge, Frankfurt/Main, 9.-10.06.2010, [Conference item]

Binder, Andreas ; Knopik, T. (2010):
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
Tagungsband 3. VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge“, Frankfurt/Main, 9.-10.06.2010, [Conference item]

Binder, Andreas ; Knopik, T. (2010):
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
E-MOTIVE, Expertenforum Elektrische Fahrzeugantriebe (FVA), Darmstadt, 7.-8.9.2010, [Conference item]

Binder, Andreas ; Knopik, T. (2010):
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge, E-MOTIVE.
Expertenforum Elektrische Fahrzeugantriebe (FVA), Darmstadt, 7.-8.9.2010, [Conference item]

Binder, Andreas ; Magdun, Oliver Narcis ; Gemeinder, Yves (2010):
EDM Bearing Currents in Inverter-Fed AC Machines.
S. 73-85, VDE/ETG-Workshop "Stromrichtergespeiste Elektromaschinen", Hannover, 08.02.2010, [Conference item]

DeGersem, H. ; Henze, O. ; Weiland, Thomas ; Binder, Andreas (2010):
Eddy-current formulation for constructing transmission-line models for machine windings.
49, In: The European Physical Journal Applied Physics, (31101), EDP Sciences, [Article]

DeGersem, H. ; Henze, O. ; Weiland, Thomas ; Binder, Andreas (2010):
Simulation of wave propagation effects in machine windings.
29, In: COMPEL, (1), S. 23-38. [Article]

Funieru, Bogdan ; Binder, Andreas (2010):
Simulation of the Air gap in 3D Models of Electrical machines.
S. 373-378, Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, 19.-22.9.2010, [Conference item]

Funieru, Bogdan ; Binder, Andreas (2010):
Simulation of the Air gap in 3D Models of Electrical machines.
S. 373-378, Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, 19.-22.9.2010, [Conference item]

Gessese, Y. ; Binder, Andreas (2010):
Analysis of the effect of radial surface grooves on motor losses of high speed solid rotor induction motor.
S. 1762-1767, 20th Int. Symp. On Power Electronics, Ele. Drives, Automation and Motion SPEEDAM 2010, Pisa, Italy, 14.-16. June 2010, [Conference item]

Magdun, O. ; Binder, Andreas ; Gemeinder, Yves (2010):
Investigation of Influence of Bearing Load and Bearing Temperature on EDM Bearing Currents.
S. 2733-2738, , IEEE-ECCE 2010, Atlanta, Georgia, 12.-16. Sept. 2010, [Conference item]

Magdun, O. ; Gemeinder, Yves ; Binder, Andreas (2010):
Prevention of Harmful EDM Currents in Inverter-Fed AC Machines by Use of Electrostatic Shields in the Stator Winding Overhang.
S. 956-961, Proc. of the Int. Conf. IECON 2010, , Glendale, USA, Nov. 7-10 2010, [Conference item]

Mirzaei, M. ; Binder, Andreas ; Deak, C. (2010):
3D Analysis of Circumferential and Axial Segmentation Effect on Permanent Magnet Eddy Current Losses in Permanent Magnet Synchronous Machines with Concentrated Windings.
ICEM 2010, Rome, Italy, 6.-8. September 2010, [Conference item]

Rastogi, Armin (2010):
Berechnung von doppeltgespeisten Asynchronmaschinen und permanent-erregten Synchronmaschinen als Windgeneratoren und Industrieantriebe.
Aachen, Shaker, TU Darmstadt, ISBN 978-3-8322-9459-5,
[PhD thesis]

Schneider, T. ; Binder, Andreas (2010):
Entwurf und experimentelle Untersuchung eines lagerlosen permanenterregten Synchron-Hochdrehzahlmotors für 60000/min.
S. 31-36, 8. ETG/GMM-Fachtagung „Innovative Klein- und Mikroantriebstechnik“, Würzburg, 22.-23. Sept. 2010, [Conference item]

Takahashi, A. ; Kikuchi, S. ; Miyata, K. ; Wakui, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2010):
Dynamic and Steady-State Performance of Line-Starting Permanent Magnet Motors.
ICEM 2010, Rome, Italy, 6.-8. Sept. 2010, [Conference item]

Takahashi, Akeshi (2010):
Dynamic and steady-state characteristics of lin- starting permanent magnet motors.
Aachen, Shaker, ISBN 978-3-8322-9037-5,
[Book]

2009

Magdun, O. ; Binder, A. ; Purcarea, C. ; Rocks, A. (2009):
High-Frequency Induction Machine Models for Calculation and Prediction of Common Mode Stator Ground Currents in Electric Drive Systems.
13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009, [Conference item]

Magdun, O. ; Binder, A. ; Purcarea, C. ; Rocks, A. (2009):
Modeling of Asymmetrical Cables for an Accurate Calculation of Common Mode Ground Currents.
IEEE Energy Conversion Congress and Exposition 2009, 20. – 24. September 2009, San José, California, [Conference item]

Purcarea, C. ; Mutschler, P. ; Magdun, O. ; Binder, A. ; Rocks, A. (2009):
Time Domain Simulation Models for Inverter-Cable-Motor System in Electrical Drives.
13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009, [Conference item]

Binder, Andreas (2009):
Hochausgenutzte Permanentmagnetsynchronmaschinen für industrielle Anwendungen.
8. Technischer Tag der VEM-Gruppe, Wernigerode, 29.-30.9.2009, [Conference item]

Gholizad, H. ; Funieru, Bogdan ; Binder, Andreas (2009):
Direct Modeling of Motional Eddy Currents in Highly Saturated Solid Conductors by Magnetic Equivalent Circuit Method.
45, In: IEEE Trans. on Magnetics, (3), S. 1016-1019. [Article]

2008

Binder, Andreas Schroeder, D. (Hrsg.) (2008):
Zusatzbeanspruchungen der Drehfeldmaschine.
In: Leistungselektronische Schaltungen - Funktion, Auslegung und Anwendung, S. 724-775, Berlin - Heidelberg, Springer-Verlag, [Book section]

Janjic, B. ; Binder, A. ; Bischof, V. ; Ludwig, G. (2008):
Entwurf und Bau eines magnetgelagerten integrierten Pumpenantriebs.
In: VDE/VDI-Tagung Elektrische-mechanische Antriebssysteme, Böblingen, 23.-24. September 2008, In: VDE/VDI-Tagung Elektrische-mechanische Antriebssysteme, [Article]

2007

Ade, Michael ; Neudorfer, H. ; Binder, Andreas (2007):
Elektrische und thermische Simulationsmodelle flüssigkeitsmantelgekühlter Asynchron- und Permanentmagnet-Synchronmaschinen für den Einsatz in Hybrid-Elektrofahrzeugen.
In: Neue elektrische Antriebskonzepte für Hybridfahrzeuge : mit 40 Tabellen / Heinz Schäfer (Hrsg.) und 73 Mitautoren. - Renningen : expert-Verl., 2007 , S. 374-387 (Haus der Technik Fachbuch ; 80) ISBN: 978-3-8169-2677-1, Renningen, expert-Verl., [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas (2007):
Comparison of different evaluation methods to determine stray load losses in induction machines with eh-star method.
In: Proceedings of the International Electric Machines and Drives Conference (IEMDC) <6, 2007, Antalya,Turkey>, S. 519-524 (CD-Rom), [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas (2007):
Evaluation of different Measurement Methods to Determine Stray Load Losses in Induction Machines.
In: IEEE Transactions on Industry Electronics Magazine, 54, [Article]

Aoulkadi, M'hamed ; Binder, Andreas (2007):
Influence of Auxiliary Impedance on Stray Load Loss Determination with Eh-Star Method.
In: Proceedings of the Energy Efficiency in Motor Driven Systems Conference (EEMODs '07) Beijing, China, 2007, S. 542-553, [Conference item]

Balzer, G. ; Binder, A. ; Hartkopf, T. ; Hinrichsen, V. ; Mutschler, P. ; Stenzel, J. (2007):
Elektrische Energietechnik : Schlüsseltechnologie der Zukunft.
In: Thema Forschung, S. 6-14. [Article]

Balzer, G. ; Binder, A. ; Hinrichsen, V. ; Mutschler, P. (2007):
125 Jahre Elektrotechnik an der TU Darmstadt.
In: etz, S. 94-98. [Article]

Binder, A. (2007):
Elektrische Energietechnik - die Basis unseres Wohlstands.
In: Technik & Mensch -Energietechnik. VDI Frankfurt-Darmstadt 1/2007, S. 1., [Conference item]

Binder, A. (2007):
Elektrische Energietechnik an der TU Darmstadt - Ingenieurausbildung im Puls der Zeit.
In: Technik & Mensch -Energietechnik. VDI FrankfurtDarmstadt 1/2007, S. 17., [Conference item]

Binder, A. (2007):
Energiesparen mit moderner Antriebstechnik - Potentiale und technische Möglichkeiten (Energy Savings with Modern Drive Technology - Potentials and technical Feasibility).
In: Internationaler ETG-Kongress (2007) 23. - 24.10.07, Karlsruhe, Fachbericht 107, S. 17-26, [Conference item]

Binder, A. ; Doppelbauer, M. ; Gold, P. W. ; Hofmann, W. (2007):
Antriebssysteme : Innovationen - Trends -Mechatronik.
In: etz, S. 60-69. [Article]

Binder, A. ; Funieru, Bogdan ; Knopik, Th. ; Güllich, P. (2007):
Ausnutzung der Eisenremanenz zur Positionserfassung beim Auswuichten von Kleinrotoren.
In: Proceedings 7. (VDE) GMM/ETG-Fachtagung Innovative Klein- und Mikroantriebstechnik, 12.-13.06.2007, Augsburg, Germany, S. 81-86 (CD-ROM)., [Conference item]

Binder, A. ; Mütze, A. (2007):
Scaling Effects of Inverter-Induced Bearing Currents in AC Machines.
In: Proceedings of the International Electric Machines and Drives Conference (IEMDC), 03.-05.05.2007, Antalya, Turkey, S 1477-1483. (CD-ROM)., [Conference item]

Binder, A. ; Sabirin, C. R. ; Popa, D. D. ; Craciunescu, A. (2007):
Modeling and digital control of an Active Magnetic Bearing System.
In: Revue Roumaine des Sciences Techniques : Série électrotechnique et énergetique, 52, S. 157-181. [Article]

Binder, A. ; Schneider, T. (2007):
High-speed Inverter-Fed AC Drives.
In: Proceedings International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) 2007, 10-12 September, Bodrum, Turkey, S. 9-16, [Conference item]

Binder, A. ; Schneider, T. ; Redemann, C. (2007):
Lagerlose Motoren - eine Zukunftstechnologie?
In: Bulletin SEV/AES, S. 9-13. [Article]

Binder, Andreas ; Aoulkadi, M'hamed (2007):
Die eh-Stern-Methode - ein alternatives Messverfahren für die lastabhängigen Zusatzverluste in Asynchronmaschinen.
In: 6. Technischer Tag Antriebstechnik - Technologie für die Zukunft, VEM Gruppe, 07. 04.-0 04.-05.09.07, Wernigerode, Deutschland, 1 Seite (CD-ROM), [Conference item]

Chevailler, S. ; Feng, Lin ; Binder, A. (2007):
Short-Circuit Faults in Distributed and Concentrated Windings of PM Synchronous Motors.
In: Proceedings of the 12th European Conference on Power Electronics and Applications, (epe) 2007, 2-5 September, Aalborg, Denmark, 10 Pages (CD-ROM), [Conference item]

Cui, X. ; Binder, A. ; Schlemmer, E. (2007):
Straight-Flow Permanent Magnet Synchronous Generator Design for Small Hydro Power Plants.
In: Procedings of the International Conference on Clean Electrical Power Renewable Energy Resources Impact (ICCEP), 21.-23.05.2007, Capri, Italy, p. 323-328 (CD-ROM)., [Conference item]

Deak, Cs. ; Binder, A. (2007):
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Revue Roumaine des Sciences Techniques : série électrotechnique et énergetique, 52, S. 183-197. [Article]

Deak, Cs. ; Binder, A. (2007):
Increased torque density of permanent-magnet motors using concentrated windings and intensive cooling.
In: Proceedings of the international exhibition conference for power electronics intelligent motion power quality (PCIM Europe), Nürnberg, 2007, 6 S. (CD-ROM), [Conference item]

Funieru, Bogdan ; Binder, A. (2007):
Analysis of the force output and generated losses of a linear DC actuator supplied with a power electronic converter.
In: Proceedings of the 16th Computation of Electromagnetic Fields (COMPUMAG), 2007, Aachen, S. 691-692 (CD-ROM), [Conference item]

Funieru, Bogdan ; Binder, A. (2007):
Design of a linear transversal flux DC actuator used for railway applications.
In: Proceedings of the Korea-Germany joint symposium on power electronics. (2007), 18-21 October 2007, POSTECH international Center, Pohang, Korea,S. 25-39, [Conference item]

Funieru, Bogdan ; Binder, A. (2007):
Losses and forces due to eddy currents in a magnetically non-linear conductive half space.
In: Electrical Engineering (Archiv für Elektrotechnik), 90, S. 43-54. [Article]

Gholizad, H. ; Funieru, Bogdan ; Binder, A. ; Mirsalim, M. (2007):
A modified magnetic equivalent circuit method for calculating the motional eddy current.
In: Proceedings of the 6th international Symposium on linear drives for industrial applications (LDIA) 2007, September 16-19, Lille, France, S. 37-38, [Conference item]

Henze, O. ; Rocks, A. ; De Gersem, Herbert ; Weiland, Thomas ; Hinrichsen, V. ; Binder, A. (2007):
A network model for inverter-fed induction-motor drives.
In: Proceedings of the 12th European conference on Power Electronics and Applications (epe) 2007, 2-5 September, Aalborg, Denmark, 9 Seiten (CD-ROM), [Conference item]

Janjic, B. ; Binder, A. ; Bischof, V. ; Ludwig, G. (2007):
Design of PM integrated motordrive systems for axial pumps.
In: Proceedings of the 12th European Conference on Power Electronics and Applications, 2007, 2-5 September, Aalborg, denmark, 10 Seiten (CD-ROM), [Report]

Knopik, T. ; Binder, A. ; Güllich, P. (2007):
Rotor angle detection via shaft iron remanence for the blancing process of small rotors.
In: Proceedings of the 6th IEEE International symposium on diagnostics for electric machines, power electronics and drives (IEEE sdemped 2007), 6-8 September, Krakau, Polen s. 291-296 (CD-ROM), [Conference item]

Magdun, O. ; Binder, A. ; Rocks, A. ; Henze, O. (2007):
Prediction of common mode ground current in motors of inverter-based drive systems.
In: Proceedings of the international aegean conference on electrical machines and power electronics (ACEMP) 2007, 10-12 September, Bodrum, turkey, S. 806-811, [Conference item]

Mütze, A. ; Binder, A. (2007):
Calculation of circulating bearing currents in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, 54, S. 932-938. [Article]

Mütze, A. ; Binder, A. (2007):
Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, 43, S. 665-672. [Article]

Mütze, A. ; Binder, A. (2007):
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC-motors up to 500 kW.
In: IEEE Transactions on Industry Electronics Magazine, 54, [Article]

Mütze, A. ; Binder, A. (2007):
Techniques for measurement of parameters related to inverter-induced bearing currents.
In: IEEE Transactions on Industry Applications, 43, S. 1274-1283. [Article]

Petrovic, L. ; Binder, A. ; Deak, C. ; Irimie, D. ; Reicher, K. ; Purcarea, C. (2007):
Numerical methods for calculation of eddy current losses in permanent magnets of synchronous machines.
In: ISEF, Prague, 13-15 September 2007, S. 275 (digest), full paper 6 pages (CD-ROM), publ. in IOS Press: Advanced Computer Techniques in Applied Electromagnetics, paper no. B 1-3, [Conference item]

Schlemmer, E. ; Ramsauer, F. ; Cui, X. ; Binder, A. (2007):
HYDROMATRIX and StraflomatrixTM, electric energy from low head hydro potential.
In: Proceedings of the International conference on Clean Electrical Power Renewable Energy Resources Impact (ICCEP), 21.-23.05.2007, Capri, Italy, S. 329-334 (CD-ROM), [Conference item]

Schneider, T. ; Binder, A. (2007):
Design and evalualtion of a 60000 rpm permanent magnet bearingless high speed motor.
In: Proceedings of the seventh international conference on power electronics and drive systems (PEDS) 2007, November 27 - 30, Bangkok, Thailand. 8 S. (CD-ROM), [Conference item]

Schneider, T. ; Binder, A. (2007):
Lagerlose Motoren als Hochdrehzahlantriebe.
In: Thema forschung, S. 64-68. [Article]

2006

Ade, Michael ; Neudorfer, H. ; Binder, Andreas (2006):
Modellierung und Simulation des elektrischen Antriebsstrangs für Elektro- und Hybrid-Elektrofahrzeuge.
In: Tagungsband der Konferenz "Elektrisch-mechanische Antriebssysteme", 27.-28.9.2006, Böblingen, VDI-Berichte 1963, VDI-Verlag, S.141-154., [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas (2006):
Evaluation of Different Measurement Methods to Determine Stray Load Losses in Induction Machines.
In: Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, S. 1-13 - S1-18., [Conference item]

Binder, A. ; Deak, C. ; Schneider, T. (2006):
Erhöhung der Drehmomentdichte elektrischer Permanentmagnetmotoren durch Einsatz von Zahnspulentechnologie und intensivierter Kühlung.
In: 5. Technischer Tag der VEM-Gruppe, 12.-13.9.2006, Wernigerode, CD-ROM., [Conference item]

Binder, A. ; Muetze, A. (2006):
Calculation of influence of insulated Bearings and insulated Inner Bearing Seats on Circulating BearingcCurrents in Machines of Inverter-Based Drive Sstems.
In: IEEE Transactions on Industry Applications, 42, S. 965-972. [Article]

Binder, A. ; Neudorfer, H. ; Wicker, N. (2006):
Computational Investigation of two Hybrid Vehicle Energy Managements.
In: Automobiltechnische Zeitschrift : ATZ, 108, S. 22-25. [Article]

Binder, A. ; Sabirin, C. R. ; Popa, D. D. ; Craciunescu, A. (2006):
Modeling and Control of an Active Magnetic Bearing System.
In: Proceedings of the 10th Internaional Conference on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, S.37-44., [Conference item]

Binder, A. ; Schneider, T. (2006):
Leichtere Elektromotoren durch Hochausnutzung von Werkstoffen.
In: thema Forschung, S. 68-72. [Article]

Binder, A. ; Schneider, T. ; Klohr, M. (2006):
Fixation of Buried and Surface Mounted Magnets in High-Speed Permanent-Magnet Synchronous Machines.
In: IEEE Transactions on Industry Applications, 42, S. 1031-1037. [Article]

Binder, A. ; Schneider, T. ; Redemann, Ch. (2006):
Lagerlose Motoren - eine Zukunftstechnologie ?
In: Proceedings of the ASB Congress (Antreiben- Steuern -Bewegen), 21.-22.2.2006, Stuttgart, Germany, 12 pages, CD-ROM, [Conference item]

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006):
Calculation of No-Load Additional Losses in the Rotor of StrafloMatrixTM Synchronous Turbine-Generators.
In: Proceedings of the Symposium. on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, 6 pages, S. 3-33 - S3-38., [Conference item]

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006):
PM Generator No-Load Additional Loss Calculation Using FE Models with an Equivalent Current Layer.
In: Proceedings of the 6th International Conference on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, S. 103-104, [Conference item]

De Gersem, Herbert ; Muetze, A. ; Binder, A. ; Weiland, Thomas (2006):
Finite-Element Simulation of the Common-Mode Flux in Inverted-Fed Induction Machines.
In: Proceedings of the 6th International Conference on Computation in Electromagnetics, April 2006, S. 107-108, [Conference item]

De Gersem, Herbert ; Mütze, A. ; Binder, A. ; Weiland, Thomas (2006):
Finite Element Simulation of the Common-Mode Flux in Inverted-fed Induction Machines.
In: Proceedings of the 6th International Conference on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, S .107-108, [Conference item]

Deak, C. ; Binder, A. (2006):
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Proceedings of the 10th Internationalal Conference on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, S. 9-14, [Conference item]

Deak, C. ; Binder, A. (2006):
Highly utilised Permanent Magnet Synchronous Machines with Tooth-wound Coils for Industrial Applications.
In: Electromotion, 13, S. 36-41. [Article]

Deak, C. ; Binder, A. ; Magyari, K. (2006):
Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Proceedings of the 17th International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM, [Conference item]

Feng, L. ; Binder, A. ; Rentschler, A. ; Paweletz, A. ; Guenther, D. (2006):
Fault Investigation of X-by-wire Permanent Magnet Synchronous Machine.
In: Proceedings of the CES/IEEE-PELS 5th International Power Electronics and Motion Control Conference; 14-16-8.2006, Shanghai, China, Vol. 2, p. 843-847, [Conference item]

Feng, Lin ; Rentschler, A. ; Binder, A. ; Paweletz, A. (2006):
Fault model of an Inverter-fed PM motor for x-by-wire systems.
In: Proceedings of 4th IFAC Symposium on Mechatronic Systems, 12.-14.9.2006, Heidelberg, Germany, p. 205-210, [Conference item]

Gautam, N. ; Rentschler, A. ; Schneider, T. ; Binder, A. (2006):
Modeling and analysis of parallel connected permanent magnet synchronous generators in a small hydropower plant.
In: WSEAS Transactions on Power Systems, 1, S. 825-830. [Article]

Muetze, A. ; Binder, A. (2006):
DonÁt Lose Your Bearings - Mitigation techniques for bearing currents in inverter-supplied drive systems.
In: IEEE IAS Magazine, 12, S. 22-31. [Article]

Muetze, A. ; Binder, A. ; Vogel, H. ; Hering, J. (2006):
What can bearings bear? - How much current is too much?
In: IEEE IAS Magazine, 12, S. 57-64. [Article]

Neudorfer, H. ; Binder, A. ; Wicker, N. (2006):
Analyse von unterschiedlichen Fahrzyklen für den Einsatz von Elektrofahrzeugen.
In: Elektrotechnik und Informationstechnik : e & i (0932-383X), 123, S. 352-360. [Article]

Neudorfer, H. ; Wicker, N. ; Binder, A. (2006):
Rechnerische Untersuchung von zwei Energiemanagements für Hybridfahrzeuge.
In: Automobiltechnische Zeitschrift : ATZ, 108, S. 502-509. [Article]

Rastogi, A. ; Binder, A. (2006):
Analytical versus Numerical magnet circuit calculation of PM machines at high load saturation.
In: Proceedings of the 17th International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM, [Conference item]

Schneider, T. ; Binder, A. ; Chen, L. (2006):
Design procedure of bearingless high-speed permanent magnet motors.
In: Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, A. Krawczyk et al. (Eds.), IOS Press, 2006, S. 473-478, [Book section]

Werner, U. ; Binder, A. (2006):
Rotor dynamic analysis of asynchronous machines including the Finite-Element-Method for engineering low vibration motors.
In: Proceedings of the Symposium on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, p. 33-20 - S33-28., [Conference item]

Werner, U. ; Binder, A. (2006):
Rotordynamische Auslegung von überkritisch betriebenen Asynchronmaschinen unter Berücksichtigung der Fundamentsteifigkeit.
In: Tagungsband der Konferenz "Elektrisch-mechanische Antriebssysteme", 27.-28.9.2006, Böblingen, VDI-Berichte 1963, VDI-Verlag, p. 533-546., [Conference item]

2005

Anders, Markus ; Binder, Andreas ; Suess, M. (2005):
A spherical linear motor as direct drive of an airborne optical infrared telescope.
In: LDIA 2005. The Fifth International Symposium on Linear Drives for Industry Applications. <5, 2005, Kobe-Awaji, Japan> Proceedings, S. 528-531., [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas (2005):
Comparison of different measurement methods for stray load losses in cage induction machines : Input-Output Method, RRT-Method and Eh-Star-Method.
In: UPEC 2005 Conference proceedings <40, 2005, Cork, Ireland> International Universities Power Engineering Conference / organised by Department of Electrical and Electronic Engineering, University College Cork; School of Electrical and Electronic Engineering, [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas (2005):
The Eh-star method for determination of stray load losses in cage induction machines.
In: EEMODS. 4th International Conference 2005 - Energy Efficiency in Motor Driven Systems. <4, 2005, Heidelberg> : Proceedings Vol. 1, 130-140., [Conference item]

Aoulkadi, M'hamed ; Binder, Andreas ; Joksimovic, Gojko (2005):
Additional losses in high-speed induction machine : removed rotor test.
In: EPE 2005. 11th European Conference on Power Electronics and Applications <11, 2005, Dresden> 10 S., [Conference item]

Binder, Andreas (2005):
Direktantriebe.
In: Fachveranstaltung, Haus der Technik.10.-11.11.2005, Essen, [Conference item]

Binder, Andreas ; Klohr, Markus ; Schneider, Tobias (2005):
Losses in high speed permanent magnet motor with magnetic levitation for 40000/min, 40 kW.
In: IJEET : International Journal of Electrical Engineering in Transportation, 1, S. Proc. 9-16. [Article]

Binder, Andreas ; Mütze, Annette (2005):
Schäden sicher verhindert : Abhilfemaßnahmen für umrichterbedingte Lagerströme in Industrieantrieben.
In: Antriebstechnik, S. 36-40. [Article]

Binder, Andreas ; Schneider, Tobias (2005):
Permanent magnet synchronous generators for regenerative energy conversion : a survey.
In: EPE 2005 : 11th European Conference on Power Electronics and Applications <11, 2005, Dresden>. - Brussels : EPE Association, 2005, 10 S. ISBN: 90-75815-08-5, Brussels, EPE Association, [Conference item]

Binder, Andreas ; Schneider, Tobias ; Klohr, Markus (2005):
Fixation of buried and surface mounted magnets in highspeed permanent magnet synchronous motors.
In: IEEE IAS 2005. Industry Applications Society, 40th Annual Meeting. October 2-6, 2005, HongKong, China. 6 S., [Conference item]

Binder, Andreas ; Wick, A. ; Gold, P. W. (2005):
Antriebssysteme : Trends, Innovationen, Mechatronik.
In: Etz : Elektrotechnik und Automation ; Sonderausgabe [Beil. zu Etz], S. 68-75. [Article]

Deak, Cs. ; Binder, Andreas (2005):
Highly utilised permanent-magnet synchronous machines with tooth-wound coils for industrial applications.
In: ELECTROMOTION 2005. 6th International Symposium on Advanced Electromechanical Motion Systems <6, 2005, Lausanne, Switzerland>. 6 S., [Conference item]

Funieru, Bogdan ; Binder, Andreas (2005):
Comparison of measurements and calculations of a DC linear actuator designed for railway applications.
In: LDIA 2005. The Fifth International Symposium on Linear Drives for Industry Applications. September 25-28, 2005. Kobe-Awaji, Japan. Proceedings , S. 496-499, [Conference item]

Funieru, Bogdan ; Binder, Andreas (2005):
Linear DC actuator used as a tractive effort booster for wheel-grip loss situation.
In: SPRTS 2005. International Conference on Ship Propulsion and Railway Traction Systems. 4.-6. October 2005. Bologna, Italy. Proceedings, S. 347-352, [Conference item]

Mütze, Annette ; Binder, Andreas (2005):
Calculation of the influence of insulated bearings and insulated inner bearing seats on circulating bearing currents in machines of inverter-based drive systems.
In: IEEE 2005. International Electric Machines and Drives Conference. (IEMDC). May 15-18, 2005, San Antonio, Texas, USA. Proceedings, S. 1068-1074., [Conference item]

Mütze, Annette ; Binder, Andreas (2005):
Generation of high-frequency common mode currents in machines of inverter-based drive systems.
In: EPE 2005. 11th European Conference on Power Electronics and Applications <11, 2005, Dresden>.- 2005 10 S., [Conference item]

Mütze, Annette ; Binder, Andreas (2005):
Systematic approach to bearing current evaluation in variable speed drive systems.
15, In: European Transactions on Electrical Power, [Article]

Mütze, Annette ; Binder, Andreas (2005):
Techniques for measurement of parameters related to inverter-induced bearing currents.
In: IEEE IAS 2005. Industry Applications Society, 40th Annual Meeting. October 2-6, 2005, HongKong, China,. 8 S., [Conference item]

Rentschler, Alexander ; Binder, Andreas (2005):
Dynamic simulation of torque ripple, caused by magnetic air gap asymmetries in induction machines.
In: PCIM 2005. 26th International Exhibition & Conference for Power Electronics Intelligent Motion Power Quality. 07.-09. June 2005, Nürnberg, Germany. Proceedings, 2005 S. 506-511., [Conference item]

Schneider, Tobias ; Binder, Andreas ; Chen, L. (2005):
Design procedure of bearingless high-speed permanent magnet motors.
In: Electromagnetic fields in mechatronics, electrical and electronic engineering : proceedings of ISEF '05 ; [papers presented at the International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF '05 which was, Amsterdam [u.a.], IOS Press, [Conference item]

Werner, Ulrich ; Binder, Andreas (2005):
Dynamic analysis due to eccentricity in asynchronous machines.
In: SDEMPED 2005. 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives. September 7-9 2005, Vienna, Austria. 6 Seiten, [Conference item]

Mütze, Annette ; Binder, Andreas (2005):
Systematic approach to bearing current evaluation in variable speed drive systems.
15, In: ETEP, S. 217-227. Wiley & Sons, [Article]

2004

Ade, Michael ; Binder, Andreas (2004):
Modellierung der parallelen Antriebsstränge für ein Hybrid-Elektrofahrzeug vom Typ "Hybrid through the road".
In: Elektrotechnik und Informationstechnik, S. 144-149. [Article]

Aoulkadi, M'hamed ; Binder, Andreas (2004):
Reverse rotation test for the measurement of stray load losses in 1.5 MW squirrel-cage induction generators.
In: Symposium on Power Electronics, Electrical Drives, Automation & Motion <2004, Capri>: SPEEDAM 2004 ; June 16 - 18. 2004, Palazzo dei Congressi, Capri, Italy.- Capri, 2004.-1 CD-ROM.- ISBN: 88-89389-00-1- 4 S., [Conference item]

Binder, Andreas (2004):
High-speed drives with permanent-magnet machines and active magnetic bearings.
In: German-Korean Symposium on Power Electronics and Electrical Drives <2004, Aachen>: Proceedings ... 27-29 June 2004.- S. 43-49, [Conference item]

Binder, Andreas (2004):
Ingenieurausbildung heute für die Antriebstechnik von morgen!
In: Konstruktion, S. 3. [Article]

Binder, Andreas ; Klohr, Markus ; Lu, Tong ; Hackmann, Wilhelm (2004):
High-speed drives with permanent-magnet machines and active magnetic bearings.
In: International Power Electronics and Motion Control Conference <11, 2004, Riga>: Proceedings, 2 - 4 September 2004, Riga, Latvia / organised by: Faculty of Power and Electrical Engineering, Riga Technical University, Latvia ... [Ed. by: Leonids Ribickis .., [Conference item]

Binder, Andreas ; Klohr, Markus ; Schneider, Tobias (2004):
Losses in high speed permanent magnet motor with magnetic levitation for 40000/min, 40 kW.
In: International Conference on Electrical Machines <16, 2004, Krakow>: Conference proceedings, 5 - 8 September 2004, Cracow, Poland / IMSI,Institute of Mechatronics and Information Systems, Technical University of Lodz, Poland. Ed.: S. Wiak ...- Lodz : Univ., Lodz, Univ., [Conference item]

Binder, Andreas ; Schneider, Tobias ; Klohr, Markus (2004):
Befestigung von vergrabenen vs. Oberflächenmagneten bei Hi-Speed-Permanentmagnet-Motoren.
In: Antriebstechnik - Technologien für die Zukunft : 3. Technischer Tag der VEM-Gruppe, 15.-16. September 2004, Wernigerode, Deutschland.- 3 S.,
[Conference item]

Binder, Andreas ; Zamzow, P. ; Löser, F. (2004):
Investigation of influence of asymmetries on currents in long stator winding of TRANSRAPID linear motor.
In: Symposium on Power Electronics, Electrical Drives, Automation & Motion <2004, Capri>: SPEEDAM 2004 ; June 16 - 18. 2004, Palazzo dei Congressi, Capri, Italy.- Capri, 2004.-1 CD-ROM.- ISBN: 88-89389-00-1- 4 S., [Conference item]

Cui, Xiaoli ; Binder, Andreas (2004):
Steady-state performance calculation of a permanent magnet synchronous hydropower generator.
In: ASIA Link ECLEE Annual Meeting <2004, Darmstadt> : Proceedings ... 30.8.-3.9.2004, TU Darmstadt.- 3 S., [Conference item]

Feng, Lin ; Binder, Andreas (2004):
Fault-tolerant steer-by-wine actuator for automotive applications.
In: ASIA Link ECLEE Annual Meeting <2004, Darmstadt> : Proceedings ...30.8.-3.9.2004, TU Darmstadt.- 3 S., [Conference item]

Funieru, Bogdan ; Binder, Andreas (2004):
Designing of an electromagnetic actuator for railway applications using FE programs.
In: International IGTE Symposium on Numerical Field Calculation in Electrical Engineering <11, 2004, Seggauberg>: Proceedings, Seggau Castle, Sept. 13 - 15, 2004 / TUG, IGTE.- Graz : Verl. der Technischen Universität Graz, 2004.-ISBN: 3-902465-07-7.- Proc. 3, Graz, Verl. der Technischen Universität Graz, [Conference item]

Hackmann, Wilhelm ; Binder, Andreas (2004):
Aussenläufer-Transversalflussmaschinen für Radnabenantriebe in Straßenbahnen.
In: Elektrisch-mechanische Antriebssysteme : Innovationen - Trends - Mechatronik ; Tagungsband ; 6. - 7. Oktober 2004 in Fulda ; [Fachtagung "Elektrisch-Mechanische Antriebssysteme: Innovationen - Trends - Mechatronik"] / Veranst.: Energietechnische Gesellsch, 7. Oktober 2004 in Fulda ; [Fachtagung "Elektrisch-Mechanische Antriebssysteme, Innovationen - Trends - Mechatronik"] / Veranst.: Energietechnische Gesellschaft im VDE (ETG) und VDI-Gesellschaft Entwicklung Konstruktion Vertrieb in Zusammenarbeit mit VDMA/FVA, [Conference item]

Hackmann, Wilhelm ; Binder, Andreas (2004):
Comparison of induction motor, permanent magnet motor and transversal flux motor for wheel hub drives in street cars.
In: International Power Electronics and Motion Control Conference <11, 2004, Riga>: Proceedings, 2 - 4 September 2004, Riga, Latvia / organised by: Faculty of Power and Electrical Engineering, Riga Technical University, Latvia ... [Ed. by: Leonids Ribickis .., [Conference item]

Joksimovic, Gojko ; Binder, Andreas (2004):
Additional no-load losses in inverter-fed high-speed cage induction motors.
In: Electrical engineering (Archiv für Elektrotechnik), 86 (2), S. 105-116. Springer, e-ISSN 1432-0487,
DOI: 10.1007/s00202-003-0185-3,
[Article]

Meinert, Michael ; Binder, Andreas (2004):
Active damping of inrush and DC-currents for high temperature superconducting (HTS)-transformers on rail vehicles.
In: Applied Superconductivity Conference <2004, Jacksonville, Fla.>: Proceedings, Jacksonville, FL, USA, October 03 - 08, 2004 : [ASC-2004] / [Justin Schwartz, conference chair]- New York, NY : IEEE, 2005.- 5 S., [Conference item]

Mütze, Annette ; Binder, Andreas (2004):
Calculation of circulating bearing currents in machines of inverter-based drive systems.
In: Industry Applications Conference <39, 2004, Seattle, Wash.>: Conference record, 39th IAS annual meeting; 3 - 7 October 2004, Seattle; converting theory to practice Teil: Vol. 2.- Piscataway, NJ : IEEE Service Center, 2004.- LVI S., S. 699-1395.- S. 720-72, Piscataway, NJ, IEEE Service Center, [Conference item]

Mütze, Annette ; Binder, Andreas (2004):
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC-motors up to 500 kW.
In: International Conference on Electrical Machines <16, 2004, Krakow>: Conference proceedings, 5 - 8 September 2004, Cracow, Poland / IMSI,Institute of Mechatronics and Information Systems, Technical University of Lodz, Poland. Ed.: S. Wiak ...- Lodz : Univ., Lodz, Univ., [Conference item]

Mütze, Annette ; Binder, Andreas ; Vogel, H. ; Hering, J. (2004):
Experimental evaluation of the endangerment of ball bearings due to inverter-induced bearing currents.
In: IEEE Industry Applications Conference <39, 2004, Seattle, Wash.>: Conference record, 39th IAS annual meeting; 3 - 7 October 2004, Seattle; converting theory to practice Teil: Vol. 3.- Piscataway, NJ : IEEE Service Center, 2004.- LVI S., S. 1397-2130.- S., Piscataway, NJ, IEEE Service Center, [Conference item]

Neudorfer, Harald ; Binder, Andreas (2004):
Energieeinsparungspotential bei Hybridfahrzeugen durch den Einsatz von innovativen elektrischen Antriebssystemen.
In: Innovationen für Menschen : VDE-Kongress 2004, 18. - 20. Oktober 2004 in Berlin ; [Kommunikation, Mobilität, Energie, Lebenswissenschaften] / Gesamtleitung: Gerald Gerlach.- Berlin [u.a.] : VDE-Verl., 2004.-ISBN: 3-8007-2827-3.- S. 459-465, 20. Oktober 2004 in Berlin ; [Kommunikation, Mobilität, Energie, Lebenswissenschaften] / Gesamtleitung, Gerald Gerlach.- Berlin [u.a.] : VDE-Verl., [Conference item]

Rastogi, Armin ; Binder, Andreas (2004):
Analytical approach in calculating double-fed wind generators.
In: ASIA Link ECLEE Annual Meeting <2004, Darmstadt> : Proceedings ...30.8.-3.9.2004, TU Darmstadt.- 3 S., [Conference item]

Rastogi, Armin ; Binder, Andreas (2004):
Entwurfsmethodik für doppeltgespeiste Asynchron-Windgeneratoren im Leistungsbereich bis 5 MW.
In: Elektrisch-mechanische Antriebssysteme : Innovationen - Trends - Mechatronik ; Tagungsband ; 6. - 7. Oktober 2004 in Fulda ; [Fachtagung "Elektrisch-Mechanische Antriebssysteme: Innovationen - Trends - Mechatronik"] / Veranst.: Energietechnische Gesellsch, 7. Oktober 2004 in Fulda ; [Fachtagung "Elektrisch-Mechanische Antriebssysteme, Innovationen - Trends - Mechatronik"] / Veranst.: Energietechnische Gesellschaft im VDE (ETG) und VDI-Gesellschaft Entwicklung Konstruktion Vertrieb in Zusammenarbeit mit VDMA/FVA, [Conference item]

Schneider, Tobias ; Koch, T. ; Binder, Armin (2004):
Comparative analysis of limited field weakening capability of surface mounted permanent magnet machines.
In: IEE proceedings / Electric power applications, Vol. 1, S. 76-82, [Conference item]

2003

Binder, Andreas (2003):
Transformatoren : theoretische Grundlagen.
In: Technische Akademie Esslingen: Lehrgang, 16.-17.10.2003,
Ostfildern, Technische Akademie Esslingen: Lehrgang, Ostfildern, 16.-17.10.2003, [Conference item]

Binder, Andreas (2003):
Direktantriebe.
In: Seminar im Haus der Technik, 13.-14.11.2003, Essen, [Conference item]

Binder, Andreas (2003):
Hochtourige Antriebe mit Permanentmagnetmaschinen und aktiver Magnetlagerung.
Informationsveranstaltung Mechatronik, VDMA, Frankfurt am Main, 21.2.2003, [Conference item]

Binder, Andreas ; Hofmann, Martina ; Werle, Thomas (2003):
Lineare Booster-Konzepte für die elektrische Traktion.
In: EB, Elektrische Bahnen, 101, S. 539-547. [Article]

Binder, Andreas ; Reichert, K. (2003):
Elektrische Maschinen und Antriebe : Auswahl, Auslegung und Dimensionierung.
Frankfurt am Main, Kurs VDE Lebenslanges Lernen, Frankfurt/Main, 26.-28.11.2003, [Conference item]

Binder, Andreas ; Wick, A. ; Pollmeier, S. (2003):
Vernetzte Antriebe : aktueller Stand und Trends.
In: ETZ, Elektrotechnische Zeitschrift, S. 84-93. [Article]

Hackmann, Wilhelm ; Binder, Andreas (2003):
Design and performance measurements of a permanent-magnet wheel-hub drive including cross-saturation and minimum-loss operation.
In: ELECTROMOTION, International Symposium on Advanced Electromechanical Motion Systems <5, 2003, Marrakus>: Proceedings ... November 26-28, 2003.- Vol. 1, [Conference item]

Körner, Olaf ; Binder, Andreas (2003):
Feasibility of a group drive with two permanent magnet synchronous traction motors for commuter trains.
In: EPE 2003, European Conference on Power Electronics and Applications <10, 2003, Toulouse>: Proceedings, 2 - 4 September 2003, Toulouse, France [Elektronische Ressource].- Brussels, Belgium : EPE Association, 2003.- 1 CD-ROM.- ISBN: 90-75815-07-7, Brussels, Belgium, EPE Association, [Conference item]

Meinert, Michael ; Binder, Andreas (2003):
Inrush-modeling of a single-phase 1-MVA-HTS (high temperature superconducting)-transformer for rail vehicles.
In: Conference proceedings, 2003 IEEE Power Engineering Society general meeting : 13 - 17 July 2003, Toronto, Ontario, Canada [Elektronische Ressource].- Piscataway, NJ : IEEE Operations Center, 2003.- 1 CD-ROM.- ISBN: 0-7803-7989-6 ; ISBN 0-7803-7990-X, Piscataway, NJ, IEEE Operations Center, [Conference item]

Meinert, Michael ; Binder, Andreas ; Oomen, M. P. ; Leghissa, M. (2003):
Operational influences of an IGBT-converter on the losses of the 1-MVA-high temperature supercondcting (HTS)-transformer for rail vehicles.
In: EPE 2003, European Conference on Power Electronics and Applications <10, 2003, Toulouse>: Proceedings, 2 - 4 September 2003, Toulouse, France [Elektronische Ressource].- Brussels, Belgium : EPE Association, 2003.- 1 CD-ROM.- ISBN 90-75815-07-7, Brussels, Belgium, EPE Association, [Conference item]

Mütze, Annette ; Binder, Andreas (2003):
Experimental evaluation of mitigation techniques for bearing currents in inverter-supplied drive-systems : investigations on induction motors up to 500 kW.
In: IEMDC '03, IEEE International Electric Machines and Drives Conference <2003, Madison, Wis.>: Proceedings, June 1 - 4, 2003, Madison, Wisconsin, USA / co-sponsoring technical societies: IAS; PELS ...; Vol. 3.- Piscataway, NJ : IEEE Service Center, 2003.- I, Piscataway, NJ, IEEE Service Center, [Conference item]

Mütze, Annette ; Binder, Andreas (2003):
Influence of cable and filter configuration on bearing currents in inverter-fed induction motors 11 kW to 500 kW.
In: PCIM Europe 2003, International Exhibition & Conference for Power Electronics - Intelligent Motion - Power Quality <2003, Nürnberg>: Official proceedings, 20 - 22 May 2003, Exhibition Centre Nuremberg ...- [Elektronische Ressource.- Nürnberg : ZM Commun, [Elektronische Ressource.- Nürnberg, ZM Communications GmbH, [Conference item]

Rastogi, Armin ; Binder, Andreas (2003):
Doubly fed induction generators in wind power plants.
In: Centre of Excellence Conference of the Institute of Electrical Machines, Warsaw University of Technology, 25-27 November 2003 : proceedings ...- Warsaw, 2003.- 4 S., [Conference item]

Rentschler, Alexander ; Binder, Andreas (2003):
Dynamic simulation of wound rotor induction machines in an object oriented environment using dymola/modelica.
In: IASTED International Conference on Power and Energy Systems <3, 2003, Marbella>: Proceedings ... September 3 - 5, 2003, Marbella, Spain / ed.: C. Alverez ...- Anaheim [u.a.] : Acta Press, 2003.- VI, 793 S.- Falsche ISBN: *0-88986-366-5.- Proc. 386-390, Anaheim [u.a.], Acta Press, [Conference item]

Schneider, Tobias ; Binder, Andreas (2003):
Evaluation of new surface mounted permanent magnet synchronous machine with finite element calculations.
In: ISEF, International Symposium on Electromagnetic Fields in Electrical Engineering <11, 2003, Maribor>: Selected papers ... ISEF 2003 ... held in Maribor, Slovenia on 18 - 20 September 2003] ; Vol. 2 / guest ed.: S. Wiak .- Bradford [u.a.] : Emerald, 2004., Bradford [u.a.], Emerald, [Conference item]

Mütze, A. ; Binder, Andreas (2003):
Experimental evaluation of mitigation techniques for bearing currents in inverter-supplied drive systems – Investigations on induction motors up to 560 kW.
Proc. of the Int. Conf. IEEE-IEMDC, Madison, Wisconsin, 1.-4.6.2003, [Conference item]

Mütze, A. ; Binder, Andreas (2003):
Influence of cable and filter configurations on bearing currents in inverter-fed induction motors 11 kW to 500 kW.
Intelligent Motion, S. 41-46, Int. Power Conversion & Intelligent Motion (PCIM) Conf., Nürnberg, 20-22 May 2003, [Conference item]

2002

Binder, Andreas (2002):
Transformatoren : theoretische Grundlagen.
In: Technische Akademie Esslingen: Lehrgang,
Technische Akademie Esslingen: Lehrgang, Ostfildern, 17.-18.10.2002, [Conference item]

Jöckel, Andreas ; Koch, Thomas ; Binder, Andreas (2002):
Getriebelose Antriebe für den ICE der nächsten Generation.
In: NetWorlds : Leben und Arbeiten in vernetzten Welten; VDE-Kongress 2002, Dresden / Gesamtleitung: Jörg Eberspächer.- Berlin [u.a.]: VDE-Verl., 2002.- ISBN 3-8007-2723-4.- S. 433-439, Berlin [u.a.], VDE-Verl., [Conference item]

Klohr, Markus ; Binder, Andreas (2002):
Design of carbon fiber bandages for high speed permanent magnet rotors.
In: SPEEDAM <2002, Ravello>: Proceedings, Symposium on Power Electronics, Electrical Drives, Automation & Motion, June 11-14, 2002, Ravello, Italy.- Ravello, 2002.- B7-13/B7-18, [Conference item]

Koch, Thomas ; Binder, Andreas (2002):
Permanent magnet machines with fractional slot winding for electric traction.
In: ICEM <15, 2002, Brugge>: Conference record ... International Conference on Electrical Machines, August 25-28, 2002, Brugge.- CD-ROM, [Conference item]

Lu, Tong ; Binder, Andreas (2002):
Analytical and experimental analysis of losses in inverter-fed permanent magnet high-speed machines with surface-mounted magnets.
In: ICEM <15, 2002, Brugge>: Conference record ... International Conference on Electrical Machines, August 25-28, 2002, Brugge.- CD- ROM, [Conference item]

Lu, Tong ; Binder, Andreas (2002):
Losses in inverter-fed permanent magnet high-speed machines.
In: SPEEDAM <2002, Ravello>: Proceedings, Symposium on Power Electronics, Electrical Drives, Automation & Motion, June 11-14, 2002, Ravello, Italy.- Ravello, 2002.- C5-39/C5-44, [Conference item]

Mütze, Annette ; Binder, Andreas (2002):
Influence of motor size on the nature of bearing currents : investigations at 11 kW and 110 kW inverter-fed induction motors.
In: PCIM Europe <2002, Nürnberg>: Official proceedings of the international conferences power electronics, intelligent motion, power quality, PCIM Europe 2002, Nürnberg, May 14-16, 2002.- Nürnberg: ZM Communications, 2002.- CD-ROM, Nürnberg, ZM Communications, [Conference item]

Mütze, Annette ; Binder, Andreas (2002):
Systematical approach to bearing current evaluation in speed drive systems.
In: ICEM <15, 2002, Brugge>: Conference record ... International Conference on Electrical Machines, August 25-28, 2002, Brugge.- CD-ROM, [Conference item]

Werle, Thomas ; Hofmann, Martina ; Binder, Andreas (2002):
Booster concepts for increase of tractive effort.
In: MAGLEV, International Conference on Magnetically Levitated Systems and Linear Drives <17, 2002, Lausanne>: [Proceedings] ... September 3-5, 2002, Lausanne, Switzerland.- CD-ROM, [Conference item]

2001

Binder, Andreas ; Koch, Thomas (2001):
Permanent magnet gearless traction drive for German high speed train ICE 3.
In: ICPE '01: International Conference on Power Electronics < 2001, Seoul>: Proceedings. S. 756-760, [Conference item]

Binder, Andreas ; Körner, O. (2001):
Im Rausch der Geschwindigkeit - was treibt den ICE - Antriebstechnik für die neue Bahn.
In: 2-B-ING: Facts für junge Leute, S. S. 24-25. [Article]

Binder, Andreas ; Werle, T. (2001):
Traction systems with linear machines for railway systems.
In: Communications, S. Proceedings 61-66. [Article]

Hofmann, Martina ; Binder, A. ; Pfeiffer, R. (2001):
Investigations of a linear induction machine for railway applications.
In: IEEE-IEMDC 2001: International Electric Machines and Drives Conference <2001, Cambridge, Mass.>:Proceedings. S. 20-26, [Conference item]

Klohr, Markus ; Hinkelmann, C. ; Binder, Andreas (2001):
State space control of a high speed rotor on active magnetic bearings.
In: ISEF 2001: International Symposium on Electromagnetic Fields in Electrical Engineering <10, 2001, Krakow>; Proceedings. S. 593-598, [Conference item]

Koch, Thomas ; Binder, A. (2001):
Energy saving with high speed trains propelled by direct permanent magnet synchronous drive.
In: PCIM 2001: International Power Electronics Confernce <2001, Nürnberg>; Proceedings. S. 263-268, [Conference item]

Koch, Thomas ; Binder, A. (2001):
Permanent magnet synchronous direct drive for high speed trains.
In: ELECTROMOTION: International Symposium on Advanced Electromechanical Motion Systems <4, 2001, Bologna>; Proceedings Vol.1, S. 287-292, [Conference item]

Körner, Olaf ; Binder, Andreas ; Breuer, W. (2001):
High-performance locomotives: what drive for which speed ?
In: International Conference Railway Traction Systems <2001, Capri>: Proceedings. S. 72-86, [Conference item]

Lu, Tong ; Binder, A. (2001):
Experimental investigation of the additional losses in permanent magnet high-speed machines under inverter operation.
In: KIEE/EMECS: Spring Annual Conference 2001: The International Session on EHV Class GCB/GIS Technology & High Speed Rotating Machine Technology <2001, Jeju, Korea>; Proceedings. B-10 - B-15, [Conference item]

Werle, Thomas ; Binder, Andreas (2001):
DC linear actuator with massive iron as secondary.
In: LDIA 2001: International Symposium on Linear Drives for Industry Applications <3, 2001, Nagano, Japan>; Proceedings. S. 52-56 - Tokyo: Inst. of Electrical Eng. of Japan, 2001, [Conference item]

Werle, Thomas ; Binder, Andreas (2001):
DC-fed railbooster for locomotives.
In: SIELA 2001: International Symposium on Electrical Apparatus and Technologies <12, 2001, Plovdiv, Bulgaria>; Proceedings. Vol. 1, S. 358-365, [Conference item]

Werle, Thomas ; Hofmann, Martina ; Binder, Andreas (2001):
Asynchronous linear machine with massive iron as secondary.
In: PCIM 2001: International Power Electronics Conference <2001, Nürnberg>; Proceedings. S. 257-262, [Conference item]

Koch, Th. ; Binder, Andreas (2001):
Permanent Magnet Gearless Traction Drive for German High Speed Train ICE 3.
S. 49-53, Korea-Germany Joint Symposium on Advanced Power Electronics, Oct.2001, [Conference item]

2000

Anders, Markus ; Binder, A. (2000):
Dynamic model of an airborne permanent magnet direct telescope drive.
In: IFAC-Conference on Mechatronic Systems <1, 2000, Darmstadt>: Proceedings. Hrsg.: R. Isermann. - Düsseldorf: VDI/VDE-Ges., 2000. S. 191-196, Düsseldorf, VDI/VDE-Ges., [Conference item]

Anders, Markus ; Schönhoff, Ulrich ; Andresen, E.-G. ; Binder, A. ; Nordmann, Rainer (2000):
Entwicklung des Stellantriebs, Simulation und Optimierung der Bildstabilität für das flugzeuggestützte Infrarotteleskop SOFIA.
In: Thema Forschung, S. 44-56. [Article]

Binder, Andreas (2000):
Comparison of motor types with respect to system integration.
In: CIPS 2000: International Confernce on Integrated Power Systems <2000, Bremen>; Proceedings. - Berlin, Offenbach: VDE-Verl., 2000 = ETG-Fachbericht; 81. S. 151-160, Berlin, Offenbach, VDE-Verl., [Conference item]

Binder, Andreas (2000):
Switched reluctance drive and inverter-fed induction machine - a comparison of design parameters and drive performance.
82, In: Electrical engineering, S. 239-248. [Article]

Binder, Andreas ; Körner, O. (2000):
Entwicklungsperspektiven des Tatzlagerantriebs für höhere Geschwindigkeiten.
In: Schienenfahrzeugtagung Rad 2000 <4, 2000, Dresden>: Tagungsbd. S. 74-76, [Conference item]

Binder, Andreas ; Werle, T. ; Hofmann, M. ; Bruno, O. ; Lupo, P. (2000):
Analytical investigations of asynchronous linear motor with conventional rail as secondary.
In: Computers in Railways <7, 2000, Bologna>: Proceedings. S. 633-639, [Conference item]

Hagenkort, Bert ; Hartkopf, Thomas ; Binder, Andreas ; Jöckel, Stephan (2000):
Modelling a direct drive permanent magnet induction machine.
In: ICEM 2000: International Conference on Electrical Machines <2000, Espoo, Finland>; Proceedings. S. 1495-1499, [Conference item]

Hofmann, Martina ; Werle, T. ; Binder, A. ; Pfeiffer, R. (2000):
Asynchronous linear machine for railway systems.
In: ICEM 2000: International Conference on Electrical Machines <2000, Espoo, Finland>; Proceedings. S. 223-227, [Conference item]

Lu, Tong ; Binder, A. ; Pfeiffer, R. (2000):
Rotor losses in permanent magnet high-speed machines.
In: ICEM 2000: International Conference on Electrical Machines <2000, Espoo, Finland>: Proceedings. S. 608-612, [Conference item]

Lu, Tong ; Binder, Andreas ; Pfeiffer, R. (2000):
Wirkungsgradverbesserungen bei Hochdrehzahlantrieben.
In: SPS IPC/DRIVES: Elektrische Automatisierung - Systeme und Komponenten; Fachmesse und Kongress, Nov. 2000, Nürnberg. - Berlin: Hüthig, 2000. S. 522-530, Berlin, Hüthig, [Conference item]

Schätzer, Christoph ; Binder, A. (2000):
Design optimization of a high-speed permanent magnet machine with the VEKOPT algorithm.
In: IEEE-IAS Annual Meeting <2000, Rome>: Tagungsbd., [Conference item]

Werle, Thomas ; Binder, Andreas (2000):
Asynchronous linear machine as booster for railway vehicles.
In: International Conference on Power Electronics and Variable Speed Drives <8, 2000, London>: Proceedings. - London: IEE, 2000 = Conference Publication; No. 475. S. 224-228, London, IEE, [Conference item]

1999

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999):
Determination of thrust force ripple of a spherical linear PM motor for a direct telescope drive.
In: EPE'99: European Conference on Power Electronics and Applications <8, 1999, Lausanne>: Proceedings. S. 1580-1588, [Conference item]

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999):
Ein sphärischer Linearmotor als Direktantrieb eines optischen Infrarotteleskops.
In: Internationale ETG-Tage '99: München 1999. S. 507-513. - München: VDE-Verl., 1999 (ETG-Fachbericht; 79), München, VDE-Verl., [Book section]

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999):
A novel spherical linear PM motor for direct driving infrared optical telescope.
In: IEMDC'99: IEEE International Electric Machines and Drives Conference <1999, Seattle, Wash>: Proceedings. S. 528-530, [Conference item]

Binder, Andreas (1999):
DC-Machines.
In: Wiley encyclopedia of electrical and electronic engineering. Vol. 5. S. 63-77. - New York, NY: Wiley, 1999, New York, NY, Wiley, [Book section]

Binder, Andreas ; Körner, O. ; Pfeiffer, R. ; Jöckel, A. (1999):
Optimum torque transmission for high-speed locomotives: Cardan hollow shaft or axle-hung drive?
In: EPE'99: European Conference on Power Electronics and Applications <8, 1999, Lausanne>; Proceedings. S. 1415-1424, [Conference item]

Binder, Andreas ; Schrepfer, A. (1999):
Lagerströme bei umrichtergespeisten Drehstrommotoren.
38, In: Antriebstechnik, S. 46-48. [Article]

Hofmann, Martina ; Werle, T. ; Pfeiffer, R. ; Binder, A. (1999):
2D und 3D numerical field computation of eddy-current brakes for traction.
In: COMPUMAG'99: Conference on the Computation of Electromagnetic Fields <12, 1999, Sapporo>: Proceedings. S. 752-753, [Conference item]

Jöckel, Andreas ; Binder, A. ; Körner, O. ; Pfeiffer, R. (1999):
Tatzlager-Lokomotivantrieb für 200 km/h.
In: International Conference Electric Railway Systems <2, 1999, Berlin>. S. 85-89. - Berlin: VDE-Verl., 1999 (ETG-Fachbericht; 74), Berlin, VDE-Verl., [Conference item]

Klohr, Markus ; Binder, Andreas ; Eichhorn, J. (1999):
Bemessung und Simulation eines magnetgelagerten Permanentmagnetantriebs (MAGPERM) 40 kW, 40000 min-1.
In: Workshop Magnetlagertechnik <4, 1999, Kassel-Zittau>; Tagungsbd. S. 18-24, [Conference item]

Schätzer, Christoph ; Binder, A. ; Müller, W. (1999):
Vector optimization of a high-speed drive using two-dimensional numerical field calculation.
In: ISEF'99: International Symposium on Electromagnetic Fields in Electrical Engineering <1999, Pavia, Italy>; Proceedings. S. 401-404, [Conference item]

Schätzer, Christoph ; Binder, A. ; Müller, W. (1999):
A new approach for solving vector optimization problems.
In: COMPUMAG'99: Conference on the Computation of Electromagnetic Fields <12, 1999, Sapporo>: Proceedings. S. 160-161, [Conference item]

Binder, Andreas Webster, J. G. (Hrsg.) (1999):
DC Machines.
5, In: Encyclopedia of Electrical and Electronics Engineering, S. 63-77, New York, John Wiley & Sons, Inc., [Book section]

1998

Binder, Andreas (1998):
Comparison of switched-reluctance and inverter-fed alternating current drives.
In: SAE '98: European Switched Reluctance Motors and Brushless Technology Toptec <1998, München>: Proceedings, [Conference item]

Binder, Andreas (1998):
Electromagnetic interference of brake stray fields on resolvers in brushless d.c. servo drives.
In: Mathematics and computers in simulation. 46 (1998), H. 3-4, S. 339-347, [Article]

Binder, Andreas (1998):
Professor Emeritus Dr.-Ing. Egon Christian Andresen 70 Jahre: Laudatio anläßlich des 70. Geburtstages von Herrn Prof. Andresen.
In: Elektrie. 52 (1998), H. 7-9, S. 182, [Article]

Binder, Andreas ; Aust, ; Schrepfer, (1998):
Bearing currents - a danger to inverter-fed A.C. motors?
In: AISE '98: Association of Iron and Steel Engineers: Annual Convention and Mini-Expo <1998, Pittsburgh, USA>: Proceedings; S. 47-52 (AISE Publication; July 1999), [Conference item]

Binder, Andreas ; Greubel, ; Piepenbreier, ; Tölle, (1998):
Permanent-magnet synchronous drive with wide field-weakening range.
In: ETEP: European transactions on electrical power. 8 (1998), H. 5/6, S. 157-166, [Article]

Binder, Andreas ; Schrepfer, (1998):
Bearing currents in induction machines due to inverter supply.
In: ICEM '98: International Conference on Electrical Machines <1998, Istanbul, Turkey>: Proceedings. S. 586-591, [Conference item]

Binder, Andreas ; Storath, (1998):
Comparison of square-wave and sine-wave fed permanent magnet synchronous servo motors.
In: SPEEDAM '98: Symposium on Power Elecrtronics, Electrical Drives, Advanced Machines, Power Quality <1998, Sorrento, Italy>: Proceedings. C3, S. 19-24, [Conference item]

Binder, Andreas ; Storath, ; Kaumann, (1998):
Moderne Arbeitstechnik spart Energie : ein Vergleich energieeffizienter Drehstrommotoren.
In: Elektrie. 52 (1998), H.1/2, S. 47-55, [Article]

1997

Binder, Andreas (1997):
Electromagnetic interference of brake stray fields on resolvers in brushless d.c. servo drives.
In: Mathematics and computers in simulation. 1506 (1997), S. 1-9, [Article]

Binder, Andreas ; Jungkunz, (1997):
Entwurf und Bau eines Prototypmagnetlagers SIMAB.
In: Zittauer Workshop Magnetlagertechnik <3, 1997, Zittau>: Tagungsbd. S. 21-31, [Conference item]

Binder, Andreas ; Taylor, (1997):
Ertüchtigung der Frequenzumrichtertechnik für den Einsatz in Umrichtermotoren.
In: Antriebstechnik. 36 (1997), H. 7, S. 42-44, [Article]

1996

Binder, Andreas Reichert, K. (Hrsg.) (1996):
"Motor- und Kabelbelastung durch Umrichter".
In: RAVEL-Broschüre, In: "Messen von Betriebsparametern elektrischer Antriebe", S. 48-52, ISBN 3-905233-97-5,
[Book section]

This list was generated on Wed Nov 25 02:10:19 2020 CET.